Heavy mineral processing jig machine

Heavy mineral processing jig machine:High capacity,High concentration ratio and high recovery,High quality,Easy operation - details see: https://www.machineto.com/heavy-mineral-processing-jig-machine-10319295

Place of Origin:Jiangxi China (Mainland)	Brand Name:Well	Model Number:JT	Condition:New
After-sales Service Provided:Engineers available to service machinery overseas	Capacity:1-20t/h	Feeding size:-6mm	Hutch shape:trapezoid, rectangle
Application:tungsten ore, gold ore, manganese ore etc	Name:Heavy mineral processing jig machine

Descriptions
Our Saw-tooth Wave Jig is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jig. The difference between Saw-tooth Wave Jig and Sine Wave Jig is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction.
In practice, contrast of Saw-tooth Wave Jig and Sine Wave Jig shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.

Advantages and Characteristics

High capacity
High concentration ratio and high recovery
Easy to install, operate and maintain
The pulsation curve is saw-tooth wave shape facilitate heavy
Can achieve a good result in processing such as placer gold, mineral to settling
Saving water 30-40% than ordinary jig
The pulsation speed very easily adjusted by regulator
tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc

Main Technical Parameters

Model	Hutch		Diaphragm		Feeding Size (mm)	Amount of make-up water (m3/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
Model	Shape	Area (m2)	Stroke (mm)	Frequency of Stroke (r/min)	Feeding Size (mm)	Amount of make-up water (m3/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
JT0.57-1	Trapezoid	0.57	8.5—12 10—17 12-21	80-180	<6	1-2	≥0.05	1.5-3	1.5	1550×780×1530	610
JT1-1	Trapezoid	1.04			<10	2-3		2.5-5	2.2	2270×1110×1890	900
JT2-2	Rectangle	2.28			<10	2-4		5-10	3	3225×1550×2050	1640
JT3-1	Trapezoid	3	12-30	50-125	<10	3-6		7.5-15	5.5	2745×2000×3030	3085
JT4-2	Rectangle	4	25-57		<25	4-8		8-20	7.5	4240×1990×2750	3098
JT4-2S	Rectangle	4	25-57		<25	4-8		8-20	4×2	4240×1990×2750	3500
JT5-2	Trapezoid	4.86	12-30		<10	3-6		12-25	7.5	3600×2000×2600	4500