Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Textile Finishing Machines

The stenter is used for both natural fiber and chemical fiber. and both for woving and knitting fabrics. - details see: https://www.machineto.com/heat-setting-stenter-machine-10278947

Machine Usage:

YXLD2400 hot air stenter is mainly used for the cotton,polyester,wool,hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics and good hand feeling.

Technical flow and each part brief :

open width fabrics enter-- width expanding --infra red expanding and centering-- two rollers mangle---tension synchronous control -----mechanical weft straightner--lower overfeeding--screw expanding----upper overfeeding--edge spreader--infra-red inspector--overfeeding pin on--heat setting---coolant air--pin off--exit--plaiter or rolling

Machine Technical paramters:

Machine working pattern : chains circulation horizontal rotary

Heat setting pattern :hot air circulation

Chains pattern :pitch 60mm,stainless steel chains.

Rail pattern stainless steel rail,graphite strip,non oil lubrication

Machine standard power :380V(±5%)50Hz3PH

Control power :220V,24V

Applicable steam specification :3-6Kg/cm²saturated steam

Steam comsumption :100~150kg/hour

Applicable compressed air specification : 0.3-0.6Mpa compressed airwithout moisture

Maximum temperature of the heating chamber : 220°C

Applicable heat sourch A. Circulation thermal oil

B. 2Kpa-3.5Kpa natural gas

Circulation oil consumption :80000-140000Kcal/ H·chamber(0.33-0.6GJ)

Natural gas consumption : 8-15m³/H·chamber(about6.5-12KG)

Main chain driven pattern : right and left chains drive seperately

Working width control pattern : working width of each chamber adjust seperately

Air delivery pattern of the heating chamber : upper blower chamber and lower blower chamber control air volume seperately.

Pin plate maximum working width : 2000mm-3000mm

Heating chamber width :3000mm/chamber

Machincial speed : 5~80m/min

Power of some parts Padder:12.5kw

Gluming,cutting,sucking device :6.74 KW(optional)

Pneumatic edge spreader 3KW

Driven device 45 KW

Each chamber power 15.75kw

Machine dimension(Max) L=18000+3000mm/chamber*Nchamber

W=2700+working width H=3000

Machine weight :about 12tons+4.5ton/chamberxN chamber

Machine colour : jewelry blue + Crystal White

Insulated pannel thickness :150mm

Machine Drawing and Pictures: