Home  >  Apparel & Textile Machinery  >  Shoemaking Machines  >  Other Shoemaking Machines

STEAM GENERATOR, 10 PROGRAM MEMORY, WARNING LIGHT SYSTEM ,ERROR DETECTION SYSTEM, TOUCHPAD OPERATOR PANEL ,PASSWORD PROTECTION - details see: https://www.machineto.com/heat-setter-with-plc-controlled-and-steam-genartor-tunels-10267278

THE FIRST IN THE WORLD!..

This machine is being used between the roughing machine and assembly machine for the back part of the shoe. When the assembly process of the shoe finishes at the assembly machine for the back part of the shoe, the shoe is given to this machine. By the machine conveyor, it applies the necessary process to the shoe and also carries the shoe to the roughing machine.

STEAM GENERATOR

10 PROGRAM MEMORY

WARNING LIGHT SYSTEM

ERROR DETECTION SYSTEM

TOUCHPAD OPERATOR PANEL

PASSWORD PROTECTION SYSTEM

The machine has a lot of reasonable design differences according to the rival products.

Before Process After Process G950 Advertisement Video

Click On For Enlarging Pictures

There are 3 tunnels in the machine. The first one is the steam tunnel which takes part at the entrance. Firstly, an intensive steam is being applied to the shoe in the machine. So the toe becomes soft. After here, shoe waits one step at the interval rest, and then enters to the dry and hot cabins. At here, dry air with pressure is applied to the upper side of the shoe directly and till the place of mold. At this tunnel, only dry air is applied to the shoe. Consequently, humidity which takes part in the leather is vaporized. So the volume in the leather becomes narrow, the leather is stretched extremely because of assembling the toe to the mold strongly and the fixed area of the toe. By this stretch, the gaps which take part in the leather and the disharmony problems of the stamp of toe with mold are removed. Also, because of taking steam in the leather, the leather absorbs the adhesive better at the other processes when the adhesive slides to the shoe for attaching to the sole. So, gluing operation can be healthier. Also, because of stretching the shoe leather by machine extremely workmanship of ironing decreases 80% during the clean of shoe. Heat, spot lights or sun rays at the shops, shop windows or boxes don’t damage the form of the mold, because of taking the steam from the shoe leather and fixing by the mold form. The shoe is very hot at the exit of hot cabin and the operator can’t hold it with his hands. For not stopping the process, the shoe passes from the cold tunnel and reaches to the atmosphere heat which is nearly same with the entrance heat to the machine, and then it is delivered to the next process.

Also, there is a control system at the machine, which contains operator panel with PLC controller, touchpad screen and modem for remote control. According to this control system, 10 different programs can be made for different leathers (for example aniline, glase, nubuck, crazy, softy…etc.). Different adjustments can be used of different leathers. Leathers have to be subjected to operations with different adjustments. During the work, selecting the suitable program from the menu only can be sufficient to work with entering the adjustments for the leather. Also, the machine gives knowledge about the errors on the screen .If these errors can damage the machine, the machine stops the working automatically and “errors” message appears on the screen, warning signal is being given from the warning light. By means of the control system at the machine, when there is a problem about electrical, mechanical or programmatic, we can remove these problems with remote communication by connecting the Ethernet slot internet line which takes part at the machine.