Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mine Drilling Rig

hydraulic crawler rock drill rig, 1:ISO9001 certificated, 2:Cummins Engine, 3:drilling diameter:90-165mm, 4:drilling depth:0-40m - details see: https://www.machineto.com/hd200-hydraulic-crawler-mobile-rock-drill-rig-10313408

Hydraulic crawler rock blastingdrilling rig

INTRODUCTION of the drilling rig

HD200 hydraulic down-hole drill is a multi-functional drill rig driven by internal combustion engine, the drilling power was provided by hydraulic system except for impacting and the hole cleaning wind. It is convenient and efficient to operate. This drill is the best replacement for traditional pneumatic drills in most operation. The drill is compact in structure, simple in operation, light in total weight. HD200 hydraulic crawler drilling rig is widely used for blast-hole drilling in the mines and quarries. It is also used for anchor in road, railway, power station, civil engineering and building etc.

CHARACTERISTICS of the drilling rig

1.The Rugged track was driven by hydraulic motor with high traveling ability.
2.The feed and rotary head were driven by hydraulic motor, therefore, the air and oil consumption and total drilling cost are lower.
3.The hydraulic feed and rotary head put out the biggest feeding force and largest rotary torque, which makes it more suitable for operation in complex worksites.
4.The compressor equipped for the rig is smaller and cheaper than that one the air rig equipped, along with the best price-performance ratio than air rig.
5.The Hydraulic track oscillation makes it more suitable to drill in any rough terrain.
6.The carriage with rollers provides for minimal wear to the drill guide.
7.The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
8.The diesel engine and main hydraulic parts adopt imported products or famous domestic brand.
9.The special compensation device makes a full protection of drill rod threads.

SPECIFICATION of the drilling rig

1	Rock Hardness	F=6-20
2	Hole Diameter	mm	90-165
3	Hole Depth	m	40
4	Drilling Rod Diameter	mm	60,76,89
5	Rotation Torque	Nm	4500
6	Rotation Speed	rpm	0-100
7	Max. Feed force	KN	30
8	Max. Lifting force	KN	30
9	Max. Feed Speed	M/min	15
10	Max. Lifting Speed	M/min	15
11	Max Swing of Boom	°	45° left / 45° right
12	Max Dump of Boom	°	up60 down20
13	Max Swing of Guide	°	30(L) / 91(R)
14	Max Dump of Guide	°	180
25	Guide Extension	mm	1200
15	Feed Stroke	m	3
16	Manufacturer		CUMMINS
17	Electrical System	24	Volt
18	Compressor Pressure Required	M³/min	Φ≤115 11.3m2/min(1.4 Mpa) Φ≤140 13m2/min(1.4 Mpa) Φ≤165 17m2/min(1.4 Mpa) Φ≤165 21m2/min(2.4 Mpa)
19	Max. Travel Speed	Km/h	2
20	Gradeability	°	24
21	Net Weight	kg	6100
22	Shipping Length	mm	6900
23	Shipping Width	mm	2200
24	Shipping Height	mm	2200

PICTURE of the drilling rig

PICTURE