Home  >  Apparel & Textile Machinery  >  Sock Knitting Machinery

Different choice of elastic ribbon or be tabby 1*1,3*1fixed meshes when all textile needles working.can make flat stockings. - details see: https://www.machineto.com/h10-12-400-computerized-high-speed-flat-silk-stocking-machine-10270105

H10/12-400 AUTOMATIC COMPUTERIZED HIGH SPEED FLAT STOCKING MACHINE MAIN
Type:H10/12-400
Needle diameter:4”4-1/2”
Needles&nddele selectors:192-480N,the second and forth braided lines use the eighth-grade pneumatic to select needle;thefirst and third braided lines use the 16th-grade pneumatic to select needle.
Speed:500RPM-700RPM
Weaving system:different choice of elastic ribbon or be tabby 1x1,3x1 fixed meshes when all textile needles working,T-Shape crotch secured with 1x1,each elastic ribbon can made in full wave state.

Features:

1 Chinese and English display, large LCD display shows both character and figure.

2 Capacity of memory is 1M, can store many patterns.

3 Can input 2 patterns and 2 program files.

4 Computer control system can drive at most 6 ways of needle, 16 knives and 64 ways of air valve.

5 Pattern and program data can be input/ output by disk.

6 Equipped the UPS system can memory the current program and knitting action if transience power off. When the power restored, it can continue knitting to avoid any loss or wastage.

7 Password-protection for parameter setup, to avoid the inadvertent change or unallowed modification, improve the reliability and safety.

Characteristic:
Waist belt:The waist belt rise or fall control by pneumatic,have 2 work positions,knitted the waist belt at high position and knitted the fabric at low position.
Clippers device:The clippers rise and fall control by pneumatic.if yarm not cut off hall alarm automatically,also can blow the air to clean the slit up yarn and reduce the machine breakdown.
Stitch density:The stitch cam have enter and exit work position function.can knil multiple feeders pattern,also have work status test function and machinc in abnormally starus shall auto-stop and alarm.Adopt cam and air cylinder to achieve the stitch adjust without interval.Machine equip the high speed stcpping motor will achieve the 3D function.
Actuaror:Adopt 16 leves electric ceramic actrator.strueture easily reliable low energy consumed ahd low generate heat.
Cylinder up/down;the cylinder rise and fall eontrol by stepping molor,which can substantially adjust the stitch density.The cylinder height position shall decide the stitch density basis value.
Lubricate:Lubrication by mechanic control,which lubrication during macking revolution,because the pantyhose machinc is high speed runing and must continuous lubrication when machine revolution,which control the temperature rises and reduce the machine abradc.
Air compressor:To have functions of drainage.air pressure adjustment and alarm or lack air pressure.
Yam feede:4 feeder,each feeder with 6-8 yam fingers and each finger with 2 work positions.Change yam finger by pneumatic control,cach yam finger with high and low 2 work positions,the yam figer can move to left or right and knit the jacquard pattem.Whole yam finger device can bottom over,which easily for maintenance.
Drop hood:Control by 2 stepping motor though rough adjust the 2sets cam position with stitch press cam to achieve the fabric stitch density adjustmen,mainly uscd to achieve the take down width for knitted rib pattem.Another stetting molor can adjust the posifion of dropt hood.
Dial jacks:Control by electric magnetism vale.avoid pantyhose machine rewolution by high speed and knitted waist belt pattem.shall bring needle miss and make fabric defective.
Take down:The take down device control by suction and structure simply,enable the knitting fabric pulling foree even ahd without spoil the fiber of knitting fabric.The resist twist device prevent the twisting for wrinkle during knitted the fabric with hosicry tube bring the proportion rub and damage the fabric,which cnhancc the fabric surface quality.
Manual operation:Adopt fold type.which easy to maintain.the limit position protect control by pneumatic:I Ensure during the machine revolution will not use the manual operation;2 During use the manual opcration,machine will not use the motor driven.