gum arabic centrifuge

Tubular Centrifuges are designed to separate low percentages (<2%) of suspended solids which are between 1 and 0.001 microns. - details see: https://www.machineto.com/gum-arabic-centrifuge-10303157

Condition:New	Type:Centrifuge	Place of Origin:Liaoning China (Mainland)	Brand Name:Longda
Model Number:GQ

contact supplier for gum arabic centrifuge

Tubular Centrifuges are designed to separate low percentages (<2%) of suspended solids which are between 1 and 0.001 microns in size, and to separate two immiscible liquids of differing densities. Tubular Centrifuges operate at high speed, generating up to 20,000 gravities of centrifugal force, causing solids to collect inside the smooth bore of the stainless steel tube where they are easily recovered. Tubular Centrifuges are an excellent replacement for many traditional filter and membrane applications due to their high efficiency (virtually no product loss) and small footprint. Additionally, unlike traditional filters, they never require pre-coating or back-flushing and can never clog.

Typical Applications

agglomerated proteins
aluminum silicate
animal cell fraction
antibiotics
bacteria
beta naphtholate
bio-fuel processing
biomass harvesting
bioremediation
blood fractionation
brewer’s yeasts
brine sludge
calcium carbonate
calcium sulphate
chromium hydroxide
cocoa butter clarification
cryoglobulin
cutting oil
dicalcium phosphate
dye stuffs
escherichia coli
electroplating solutions
enzyme harvesting
ethanol stillage
fat clarification
fermentation
fish oils
flavorings
food processing effluents
fruit juice clarification
fungus
gamma globulin

graphite
guanidine nitrate
gum arabic
herbal extracts
hydraulic oil
ink
insulin tissue
iron oxide
lactose
nano particles
paper mill effluent
pathogens
pharmaceuticals
pigments
polymers
precious metals
protein precipitate
prothrombin
refinery effluent
salicylic acid
sodium nitrite
sodium sulphate
spirillum
spore collection
tallow
titanium dioxide
varnish clarification
vegetable oil refining
virus recovery
wine clarification
yeast

Solid-Liquid SeparationOPERATION:Up to 20,000 gravities of centrifugal force cause suspended solids to migrate to the centrifuge tube wall where they are retained. As the fluid travels up through the tube, smaller solids eventually migrate to the wall and the clarified fluid is discharged through the top center of the tube.

FLOW:Fluid flow in and out of the centrifuge is continuous while the solids are collected on the tube wall in a batchwise manner. Flow rates may be as high as 700 gallons per hour depending on particle size, density and required separation efficiency.

SEPARATION EFFICIENCY:Solids capture of up to 99.9% is possible depending on product characteristics and flow rate.

SOLIDS HOLDING CAPACITY:Depending on centrifuge size, solids holding capacities range from 122 cubic inches (2 liters) to 1,525 cubic inches (25 liters). Solids holding capacities for each model of tubular centrifuge are listed on the back page.

Liquid-Liquid Separation

OPERATION:Up to 20,000 gravities of force drive the heavier fluid toward the tube wall while the lighter fluid is displaced to the center of the tube.

FLOW:Fluid flow in and out of the centrifuge is continuous. In the illustration the heavier phase discharges through the left outlet and the lighter fluid discharges through the right outlet. If any solids are present they will be collected on the tube wall and may be removed periodically.

CAPACITY:Depending on the size of the centrifuge and fluid characteristics, flow rates over 1,000 gallons per hour are achievable.