Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Grinding Machines

Ultra-fine powder, high output, low energy consumption - details see: https://www.machineto.com/grinding-mill-machine-equipment-gym-86-10126731

GYM-86

1. This equipment installed capacity is 142.5KW and the power consumption is about 110 KW.H per hour. The power consumption is lowest if compared with the similar equipment.

2. Production capacity: for powder particle size D97=1250 mesh, its output is more than 1.2 MTS powder per hour, if keep on working in one year, its yearly output can be more than 10,000 MTS.(This number is take calcium carbonate for example)

3. It has an inner hierarchy system. The product can be adjusted freely between 600 meshes and 4000 mesh. Take the calcium carbonate of D97=1250 mesh (particle size less than 2.12um) for example, the powder made by this machine have high purity, the point cut-off is thin and have high quality.

4.Working principle When operating, the raw material is fed continuously from the input system into pulverizing chamber, the material will be fully pulverized after impacting, pulverizing, grinding and concussion by the grinding wheel; then the pulverized material is conveyed to the classifying chamber to be classified according to their particle size. The qualified particle will go into cyclone separator through grading wheel, and then go out to be product. A little unseparated powder will be collected by high-effective dust collector then putout to be qualified product. During this period, the whole system is working under negative pressure, the air which is cleaned by dust remover will go out through high-pressure air-introduced machine, and no dust will out to the air.

5. The complete equipment is the subordination negative pressure type production, the vibration is small, the noise is low, the running is stable, it doesn’t have the problem of dust divulging, it is environmental protection equipment.

6. The power distribution cabinet installment is automatic control. It can avoid human factor to make mistakes, guaranteeing the quality of product is stable, lengthening the service life of equipment, reducing the operators and the production cost.

Characteristics

1. This equipment is in large scale, its output is big, but energy consumption is very low, complete machine installed capacity 220KW.

mesh number (D97)	GYM-86
	Output(KG/hour)	power consumption(K.W.H/Mt)
600	----	----
800	2000	50
1250	1300	80
1500	1000	110
2000	800	130
2500	700	140
3000	600	150

2. By increasing grinding path, the powder made by it have high purity, excellent tangent point (pass percentage is 100%).

3. It has high-effective cyclone system and dust remover. The dust remover has excellent dust removing effect, it won’t be blocked. The product comes out from the cyclone system and the dust remover can do both separately packing or gather together then do packing.

4. The main body and its electrical machinery are installed separately to make sure the grinding machine can work more stable.

5. The grinding motor is controlled by a soft starter. By this can save powder and give a better protection.

6. The fineness of the product can be transformed quickly if you want to produce the different products in different particle size; the stability of the product is good.

GYM-86
Power (kw)	Main shaft		55-75
	Grading wheel		18.5
	Input		1.1
	Air blower		45
	discharger		3x0.75
	Air compressor		11
Air blower	Air volume (m³/h)		8000-12000
	Air pressure (Mpa)		>0.015
Rotor speed (r/min)	Main shaft of main body		150-220
	Grading wheel		500-2800
	input		20-2000
Fineness(u m)		3-35
Output(kg/h)		500-3500
Weight of main body(kg)		8000

technical parameter	GYM-86
Powder Fineness(um)	3-35
Output (kg/h)	600-4000
Power Distribution (KW)	130-150