Home  >  Construction Machinery  >  Building Material Machinery  >  Glass Production Machinery  >  Glass Machinery Parts

Glass furnace, 1.Less energy consumption,, 2.high yields, 3.can be used to the construction glass - details see: https://www.machineto.com/good-quality-mf-3b1206-3t-glass-furnace-10083155

MF-3B1206-3T Glass furnace

Technical Performance

The performance of the product described in the following text conforms to that made of the high-quality float glass specified by national standards in GB11614-1999 Float Glass.

Note: (1) The thickness of glass should be ≥3MM(must3mm)

(2) Four-side edges of the glass should be ground by diamond wheel until being beveled. No

hole or chamfers

are allowed.

Bending tempered:

1. Maximum area of glass sheets array: 3.2MM – 12MM 1200MM × 600 MM

2. Minimum size of glass for processing: 3.2MM – 12MM 200*350 MM

1. 3. Minimum radius: 3.2-4MM R350MM

5MM-6MM R500MM

8MM-10MM R750MM

12MM R1200MM

4. Product Quality Standards:

In conformity with GB/T9963-1998 and the most recent standards promulgated by this nation on tempered glass as well as the global

national, international and/or regional criteria and regulations. Glass relative inosculation acuities≤1.5‰

5.Production rate:

thickness(mm)	3.2	4	5	6	8	10	12
NO. of tempering cycle per hour	54	45	36	32	25	17	12

Note: The productivity may be reduced by 10-30% in the following cases:

a. When the length of an individual piece of glass exceeds 3050mm;

b. For low-E glass; and

c. For glasses of other special size, processing requirement or performance

1. Yield Rate: 97% (for high-quality float flat glass specified by GB11614-1999, with four-side edges ground, and no holes nor chamfers)

2. Glass Varieties to be Produced: Ordinary glass, pattern glass, reflective glass, color glazed glass and

coated Low-E (Radiance Value: e≥0.06) glass

3. Product Quality Standards:

In conformity with GB/T9963-1998 and the most recent standards promulgated by this nation on tempered glass as well as the global

national, international and/or regional criteria and regulations. 5mm ≤2.5‰6mm hereinbefore≤1.5‰

4. Energy Consumption: For 5mm flat glass sheets that are to be tempered and whose occupation rate inside

the hearth is above 75%, the energy consumption per square meter is equal to or less than 4kw.h.

picture of part:

1equipment of part:

2 equipment of part:

Model mm	Max mm	Min mm	Glass thickness mm	Glass curvature radius	Heating kw
MF-2B1206-3T	1200x600	200x350	3.2-12.0	R≥350	180
MF-2B1210-3T	1200x1000	200x350	3.2-12.0	R≥450	200
MF-2B1560-3T	1500x600	2oox350	3.2-12.0	R≥350	220
MF-2B1510-3T	1500x1000	200x350	3.2-12.0	R≥450	250

It is mainly used for manufacturing the side-windows of autos,and bending glass of refrigeratory and air-conditioner.