Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Industrial Heater

1. cremation furnace heater, 2. up to 1600 celsius, 3. factory direct sale, 4. reliable quality - details see: https://www.machineto.com/gold-supplier-of-w-type-silicon-carbide-cremation-furnace-heater-10245495

Gold supplier of W type silicon carbide cremation furnace heater

Specifications:

ISO9001:2008 standard

Withstand as high as 1600 Celsius

Test resistance twice to ensure accuracy

Various types: rod, U, W, H, rod, spiral, dumbbell, etc

Details:

1. The General Description of silicon carbide heater

1). Material: good quality green SiC powders.

1). character: high-applied temperature, anti-oxidization, anti-corrosion, long service life, little deformation, easy installation and maintenance.

2). usage: used in various high temperature electric furnaces and other electric heating devices, such as in the industries of magnet, ceramics, metallurgy, glass and machinery.

3). physical properties of element

specific gravity	2.6~2.8g/cm³	bend strength	>300kg
hardness	>9 MOH′S	Tensile strength	>150kg/cm³
porosity rate	<30%	radiancy	0.85

4). Recommend surface load

Furnace Temp (°c )	1100	1200	1300	1350	1400	1450
Surface load of hot zone (W/cm²)	<17	<13	<9	<7	<5	<4

Advices of using the element

1). In order to keep furnace temperature and the charges uniform of each element, before installation resistance distribution must be carried.

2). As the element is very brittle, be careful while install and maintain to avoid any damage.

3). when start to operate the furnace, raise voltage slowly and gradually, never give full load at one time .

When you inquiry, please tell us the following data:

a). Outer diameter (OD):mm

b). Length of Hot zone (HZ):mm

c). Length of Overall (OL):mm

d). Resistance (at 1050°c +/-50°c):Ohms

For any further question, pls feel free to tell us, and we are very glad to be at your service!