glass water jet cutting machine

Glass water jet cutting machine, Max working pressure: 380MPa, Capacity: to cut glass with loading/unloading system - details see: https://www.machineto.com/glass-water-jet-cutting-machine-10084487

Condition:New	Machine Type:Glass Cutting Machine	Place of Origin:Liaoning China (Mainland)	Brand Name:APW
Certification:CE	Warranty:one year	After-sales Service Provided:Engineers available to service machinery overseas	color:blue and white
main motor power:37kw	max.working pressure:380Mpa	max. flow rate:3.7L/min	control system:PLC(Omron)
accumulator volume:1.2L	way of drive:AC servo	power supply:220V 50Hz

contact supplier for glass water jet cutting machine

What is Water jet machine?

The technologies use the principle of pressurizing water to extremely high pressures, and allowing the water to escape through a very small opening (typically called the "orifice" or "jewel"). Water jets use the beam of water exiting the orifice (or jewel) to cut the material.

Abrasive jets use that same beam of water to accelerate abrasive particles to speeds fast enough to cut through much harder materials

How does Waterjet work?

The intensifier acts as an amplifier as it converts the energy from the low pressure hydraulic fluid into ultra-high pressure water. The hydraulic system provides fluid power to a reciprocating piston in the intensifier center section. A limit switch, located at each end of the piston travel, signals the electronic controls to shift the directional control valve and reverse the piston direction.

Table model	2010BB	2015BB	2515BB	4020BB	6020BB
Cutting area	2.0m×1.0m	2.0m×1.5m	2.5m×1.5m	4.0m×2.0m	6.0m×2.0m
Max moving speed	6000mm/min	6000mm/min	6000mm/min	6000mm/min	6000mm/min
Way of drive	AC servo	AC servo	AC servo	AC servo	AC servo
Control accuracy	±0.01	±0.01	±0.01	±0.01	±0.01
Cutting accuracy	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2	±0.1~±0.2
Pump model	APW38037Z	APW38037Z	APW38037Z	APW38037Z	APW38037Z
Max working pressure	380Mpa	380Mpa	380Mpa	380Mpa	380Mpa
Continuous operating pressure	330MPa	330MPa	330MPa	330MPa	330MPa
Power requirement	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ	37KW 380V/50HZ
Max. oil discharge	90 L/min	90 L/min	90 L/min	90 L/min	90 L/min
Max. water discharge	3.7L/min	3.7L/min	3.7L/min	3.7L/min	3.7L/min
Max. diameter of orifice	0.3mm	0.3mm	0.3mm

Reference Cutting Speed
Material	Thickness(mm)	Cutting Speed of 300MPa pump working pressure is 260MPa(mm/min)	Cutting Speed of 410MPa pump working pressure is 360MPa (mm/min)
Glass Brick	12	800	960
Glass	5	1200	1500
	10	500	600
	20	350	420
Glue Chipped Glass	10	450	540