Home  >  Construction Machinery  >  Building Material Machinery  >  Glass Production Machinery  >  Glass Processing Machinery

glass tempering machine production line, Clear and float glass, Beckhoff controller, Advanced heating and cooling, Cross bendin - details see: https://www.machineto.com/glass-tempering-machine-production-line-yd-fbh-2415-10084262

Glass tempering machine production line / CE

Application

This type of machine is to process flat /bent glass (heat enforced safety glass), the finished products are mainly used for furniture, home use application and building.

Technical data:

Technical date YD-FBH-2415
Parameters (for flat glass)	Max.Glass size	2400x3600mm (5-19mm), 2400x1500mm (4mm)
	Min.Glass size	100x280mm
	Glass thickness	4-19mm
	Output (5mm glass)	113 square meter/hour
Parameters (for bent glass)	Max.Glass size	2400x1500mm (4-19mm)
	Min.Glass size	400x400mm
	Glass thickness	4-19mm
	Min.radius	650mm
	Output (5mm glass)	15 lots/hour
Power	Heating	680KW
	Fan	90KW+37KW
	Others	12KW
	Total	819KW
Other parameter	Machine dimension	20x2.8x2.8m (not including fan, air collection room)
	finished products rate	95%
	energy consumption	≤4KW/hour/square meter
	Quality standard	GB 15763.2—2005

Advantage:

1. High product quality

Opposite roll pressing, mechanical position location and accurate forming which is smooth without press mark.

2. Easy operation

Glass curvation is automaticlly controlled by computer without any mould.

3. Low Engergy consumption

The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.

Warranty

Warranty period of the whole machine: one year

Machine commissioning and training

The machine needs 3 commissioning technicians to install and commissioning at buyer’s factory.

CE certicifation of tempering furnace

Tempering furnace in Australia YD-FBH-2415

Machine under manufacturing in workshop

Factory introduction

Glass shows in China and overseas