glass shape edging machine

1.Brief Description:

(1) YXM1 Glass Shape Edging Machine is designed for the grinding and polishing of external edges of shaped glass.

(2) By changing the grinding wheel, different edge profiles (flat edge with arris, pencil edge, bevel edge and OG edge) can be processed.

(3) The height of the spindle is easy to adjust.

(4) A pneumatic cylinder (included attachment) makes it possible to process round glass automatically.

(5) The turntable drive motor and worn gear are installed in the base housing. Its speed is adjusted by a step-less motor.

2.Working condition

(1) Power380V 3Φ 50HZ

(2) Condition temperature1

(3) Air relate humidity≤90%

(4) Vacuum degree scope-0.08 MPa-0.1MPa

(5) water pressure0.1 MPa0.2Mpa

(6) Air pressure0.6 MPa0.8MPa

3.Technical parameter

(1) Wheel diameterΦ150mm grinding beveling edge Φ100mmΦ150mmgrinding circle edge

(2) Rotate speed of working table0.3 rpm~3rpm

(3) Rotate speed of independence turn plate 0.7 rpm ~7rpm

(4) Processing glass thickness 3 mm ~40 mm

(5) Size of processing glass Φ100mm~Φ2200mm

(6) Bevel angle 0°~45°

(7) Maximum width of bevel B: 35mm (grinding wheel working width: b≤25mm.

(8) Minimum curvature radius of outside circle upon continuous grinding: R30mm.

(9) Minimum curvature radius of inside circle: R100mm. (see figure 2.3)

(10) Power of installation 3.92KW