Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Other Textile Machines

GA658 glass fiber once-and-for-all warpers are widely applied in warping for glass, basalt, etc, fibers - details see: https://www.machineto.com/glass-fibre-once-and-for-all-warper-10276491

Application:

GA658 glass fiber once-and-for-all warpers are designed to warp glass fiber, basalt fiber, etc yarns once and for all. Its technological process is: the bobbin frame according to the technological requirements of a certain number of yarn tension device, the yarn guide tooth hole, automatic stop device, screen reed ,reed round to weaving beam forming, after traction device for the use of weaving loom . This machine is suitable for glass fiber, basalt fiber elongation is small (no elongation), don't need to deal with the yarn sizing, warping.
GA658 type glass fiber warping machine is Huawei New Energy Technology Co., LTD in absorbing the advantages of domestic high-grade glass fiber warping machine, based on their own research and development of a kind of high-grade glass fiber warping machine . This machine is improved a lot in weaving shaft support, clap, the upper and lower shaft and transmission , reduce the height of the whole machine, increased the tension feedback system, with convenient operation , the upper and lower shaft is stable , the tension control precision, pan head flattening and pan head moderate hardness , etc.

Main Technical Features:

1. The warping speed control : using frequency control technology, to achieve a smooth starting constant linear velocity winding speed and infinitely adjustable.

2. The single tension control : adopt two pillar type tensioner to realize the single yarn tension can be adjusted.

3. Piece of yarn tension control: adopt floating roller tension feedback system and double frequency conversion motor tension control technology to realize accurate control piece of yarn tension, yarn tension stepless adjustable; The zero speed tension keeping technology to realize that when stop the piece of yarn tension keep parking.

4. Winding density control : the yarn sheet tension and weaving shaft compression pressure control winding density, make the pan head with moderate hardness.

5. Parking control: using infrared the automatic parking break automatic stop device to realize the break; After the long set and automatically stop; Set the piece length and automatic stop function (optional); When parking the braking energy and pneumatic braking method of combining the smooth stop.

6. Display fault detection .

7. Shaft on the hydraulic device.

8. Pieces of yarn electrostatic elimination.

9. Electric width adjustment.

10. Cross oscillating roll deflection .

11. Tentering reed density electric adjustment .

12. Tentering reed position electric adjustment .

Main technical parameters

1. Weaving shaft available: standard type adapt to the driving shaft as the width is 1500-2300 mm ; Coil diameter is 800 mm (can be customized according to customer requirements) .

2. The design speed: 0-100 m/min.

3. The accuracy of speed: < 2%

4. Piece of yarn tension: 40-4000 N

5. The maximum weaving shaft pressure roller pressure: 3000 N

6. Creel : according to customer requirements, typically below 4000 piece.

7. Creel spindle pitch: according to customer's requirements.

8. Creel types: fixed, rectangular , four columns of yarn

9. The power supply requirements: 3 phase 380V, 50HZ, 20KVA

10. The air supply requirement: 0.3L / S 6Mp