Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

Gff Series Air Sream Dryer, .Small installating area ang height, .High efficiency, .powerful., .Less moisture - details see: https://www.machineto.com/gffair-flow-dryer-machine-use-for-drying-and-crushing-powder-air-stream-dryer-drying-machine-10290325

GFF Enhanced air stream dryer

1. The working principle and structure features:

GFF type strengthen pneumatic drier, full system for raw materials become finished products is composed by heat exchanger, fan, feeder,first and second level drying tube, cyclone separator,airlock device, dust removal and electrical control cabinet.

When it works, filtered room temperature air directly enter into the first level drying stage through the steam exchanger, and be absorbed bynegative pressure then enter into second level dry stage to fully dry, and humid air is eliminated through the hydrofuge dust remover, the smaller particles are collected by dust remover, and finally separated by cyclone separator and then get finished product materials,discharged by the airlock device, on the one hand,unloading smoothly,meanwhile, to prevent air leakage.

GFF type strengthen pneumatic drier has the biggest characteristicis small space floor, installation is high,bottom,low, especially suitable for materials which the moisture's demand is high (final moisture can be up to 0.5%), the ordinary dryer can't compare with,it is the ideal drying equipment. Therefore, it is particularly suitable for pesticides (f thiram),structure glue accelorator(TMTD) drying,it is thebest and professional dryer for above materials.

GFF type strengthen pneumatic drier's second feature is the air flow which has been through the heat exchanger is controled by a adjusting distributing valve device.this way can adjust the wind volumn according to the requirement of the finished products.

The drying machine's feeder with adjustable speed, and can be used in different moisture content materials and different dry charging requirements, with wide adaptability.

In addition, drying machine can be not only controled by electrical device, but also can show the air's out and in and the middle second level drying stage'stemperature, so as to convinient for customers to regulate.

2. Application:

GFF type strengthen pneumatic drier is a machine which can continuously and effectively fluidize the solid , this dryer is used for various materials' particle sizewith 0.1 mm to 5 mm, mud or powder material needs the mechanical dehydration and then enter into the high temperature and high heat flow, and can get dried granular scattered products.

GFF type pneumatic drier can be widely used in chemical industry, medicine, food, dye, plastic and mineral industries powder and small granular materials' drying.

3. GFF type strengthen pneumatic drier and rotating expansion dryer's difference

GFF type strengthen pneumatic drier, also called nozzel stub pneumatic drier.

GFF type strengthen pneumatic drier develops from the basis of straight pipe pneumatic drier;it is composed with the theories of rotating expansion dryer and straight pipe pneumatic drier,it is a new type pneumatic drier.

GFF type strengthen pneumatic drier, it's bottom has a device for scattering materials, to break the filter cake material, increases the heat transfer area of the hot air and material, strengthen the drying process.

GFF type strengthen pneumatic drier equipped with hydrocyclone drying device, decrease drying time when the materials at the low temperature drying stage , can make final product with moisture content, the moisture content of the product is stable, and even quality. when the crushing device wtih high-speed, it will effect on the dryer wall's clean.

4.Technical parameters

type	Steam moisture Kg/h	Power Kw	Floor space M2	Height m
GFF-300	25	7.5	4*4	5.5
GFF-400	50	11	4*6.5	6.5
GFF-500	75	13	4*7	7.5
GFF-600	100	17	4*9	8
GFF-800	200	29	4*11	9
GFF1000	customized

5.flow chart