Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

Dryer is an before briquetting process to get the superior quality of biomass briquettes with high density. - details see: https://www.machineto.com/gas-flow-type-dryer-sawdust-drying-machine-10292702

Drier is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

This air dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on. The moisture of wet materials is at 20-30%. The wood dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan). This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

use dryer to pull the mositure out of the sawdust~

Model	QHJ-1	QHJ-2	GHJ-7	GHJ-10
Power	4kw	11kw	1.5+5.5kw	2.2+5.5kw
Capacity	300kg/h	600kg/h	700kg/h	1000kg/h
Net weight	1.6T	2.5T	2.6T	3.5T
Gross weight	1.75T	2.65T	2,75T	3.65T
Requirements on the moisture content of the raw material	About 30%		40-70%
The moisture content of the product	8-12%

ois