Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Lift Tables

1Automatic pothole protection system, 2Removeable platform control box, 3Proportional controls, 4Slide -out battery tray - details see: https://www.machineto.com/full-electric-self-propelled-scissor-lift-10198521

Technical parameter

Product Specifications	GTJZ06		GTJZ08		GTJZ10
Dimensions
working height	8.0m	9.8m		11.8m
platform height-A	6.0m	7.8m		9.8m
Platform height stowed-B	1.13m	1.26m		1.27m
platform length-C	2.3m	2.48m		2.55m
platform extension length	0.9m	0.9m		0.9m
platform width-D	0.85m	0.85m		1.15m
Height stowed-E	2.35m	2.47m		2.42m
Length-stowed-F	2.3m	2.48m		2.55m
Overall width-G	0.85m	0.85m		1.15m
Wheel base-H	1.88m	1.88m		2.12m
Ground clearance-I	0.1m	0.1m		0.09m
Productivity
guardrail height	1.0m	1.0m		1.0m
platform dimensions	2.3×0.84m	2.3×0.84m		2.55×1.15m
Platform capacity	320kg	250kg		450kg
platform extension capacity	120kg	100kg		120kg
lift-up	40s	40s		60s
lift-down	25s	25s		40s
maximum drive height	6.0m	7.8m		9.8m
weight	2100kg	2210kg		2500kg
ground bearing pressure	6.05kg/cm2	6.15kg/cm2		7.38kg/cm2
Chassis
drive speed(platform lowered)	0-3.2km/h	0-3.2km/h		0-3.2km/h
drive speed(platform elevated)	0-0.8km/h	0-0.8km/h		0-0.8km/h
turning radius inside/outside	0m/2.02m	0m/2.02m		0.26m/2.5m
Grade-ability	25%	25%		25%
maximum tilt	3°	3°		3°
non-marking solid tires	406×125mm	406×125mm		406×125mm
Power source
battery	6V×4/225Ah	6V×4/225Ah		6V×4/225Ah
charger	30A automatic	30A automatic		30A automatic
hydraulic reservoir	16L	16L		16L

The machines are powered by a hydraulic pump which is driven by one 24 volts DC motor.

Hydraulic System

All machine functions are performed by the hydraulic system. The whole hydraulic system is divided in two parts: one part is used for driving and steering function, the other part is used for platform lifting function.

All the functions are driven by a hydraulic pump, the rate of flow is 16L/min. When the pump is activated, it supplies hydraulic fluid under pressure to the function manifold, where the direction valves and control valves are located. To protect from over pressurization of the hydraulic system, the pump is provided with a pressure relief valve.

Electrical System

In this system, Use four six-volt batteries to drive the hydraulic pump and lift function controls. Batteries are charged by external power source.

Machine Controls

The machine is equipped with operational controls, which is located in the ground controls box. The controls transfer data

through a high-speed data bus.

Introduction of parts

Slide -out battery trays

Roll-out deck extension

Fork lift pockets, lift from side and rear

picture in the warehouse

Tilt cut-off safety system

Spring-loaded gate

LED battery condition indicator

Performance

Reliability and versatility,enhance efficiency

Excellent mobility

Compact body can easily pass through single and double channel doorway,using non-marking solid tire.

Special locations

Feature of low noise is perfectly suitable for the noise-sensitive environment,such as office buildings, shopping malls,hotels,schools,etc.

Compact and flexible

Most models are equipped with zero inside turning radius capability, can be easily and flexibly operated in crowed working conditions such as construction site,elevator, and narrow corridor. Lift-down,turning, forward and backward movements can be easily operated by one person.

picture for application

]