full-automatical particleboard production line machinery

1. High quality with low price., 2. Assemble line and free to install and debugging, 3 .Comprehensive after-sales service - details see: https://www.machineto.com/full-automatical-particleboard-production-line-machinery-10344099

Condition:New	Type:assemble line	Place of Origin:Shandong China (Mainland)	Brand Name:SENMAO
Model Number:PBL-20000	Voltage:380V	Certification:ISO	Warranty:3 year
After-sales Service Provided:Engineers available to service machinery overseas	capacity:20000cbm/year	material:wood/bagasses/straw/bamboo	production size:1220*2440mm
thickness:8-30mm	Material consumption:25000 ton/year	Glue consumption:4000 ton/year	Paraffin wax:120
Ammonium chloride:30	Water consumption:18	working area:5100

full-automatical particleboard production line machinery

contact supplier for full-automatical particleboard production line machinery

Chip preparation section

Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flakers by which the chips are turned to flakes, then the flake stored in wet flake tank

↓↓

Drying and sifting section

The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are sending to mill to be re-crushing, and transported to surface flake bin.

↓↓

Glue regulating and applying section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.

↓↓

Forming and hot-pressing section
the surface and core flakes are sent into the forming machine and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unload via pallet.

↓↓

Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

↓↓

Sanding Section
The boards are sanded, classified, inspected and stored.
PLC control is used in mat-forming section.