Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Planer & Slotting Machines

(1), Electric control machines attached clutch bell, moving continuous rang the bell warning, ensure operatio - details see: https://www.machineto.com/full-automatic-printting-slotting-machine-water-ink-printer-slotter-10132163

),Feeding Unit

1, Machine on-off

(1), Electric control machines attached clutch bell, moving continuous rang the bell warning, ensure operations personnel safety.

(2), Transmission shaft attached friction type clutch, avoid mistake harm machine.

(3), Pneumatic type interlocking device.

(4), The main motor adopts frequency conversion motor, frequency conversion control, energy efficient, stable starting, enclosed motor startup protection device.

2, Front roller feeder systems

(1), Suction feeder, the fan 11KW, can according to different conditions, do cardboard bending air adjustment, ensure for paper smoothly.

(2), Notching department equipped with chain control switch, control the abrupt stop feeder.

(3), Carry paper, paper adopt cylinder push down, action quick, energy saving.

(4), Adopts front roller feeder systems.

(5), Side platens, ramstroke box location electric adjustment, Former baffle clearance manual adjustment.

(6), Lie between zhang paper feeding device (can choose according to need continuous or every zhang paper-feeding).

(7), Feeding counter, setting, display production quantity.

3, Dedusting facility

(1) Paper-feeding part brush dust removal device, can remove cardboard printing surface of impurities, improve printing quality.

4, Deliver paper roll

(1), The top roller diameter for phi 140mm.

(2), Solid steel, parcel wear-resisting rubber, and do balance correction.

(3), Under 176mm embossing roll phi plating hard chromium and balance correction.

(4), Deliver paper roller clearance dial manual adjustment, adjusting range 0-12mm.

5, Automatic zero device

(1), Deliver paper department, printing department, notching department over-bed automatic zero.

(2), General carton using automatic zero device, ShiYin two copies can be adjusted to correct position, reduce cardboard waste.

Second, printing department (oblique 1-5 color printing group)

1, Printing roll (version roller)

(1), 390.6 mm diameter for phi phi (including edition diameter for 405mm).

(2), Steel surface grinding, hard chromium plating.

(3) And do balance correction and smooth operation.

(4), Ratchet stationary roll edition axis.

(5) And full-page hang edition slot, applicable 10mm x 3mm hang edition bar.

(6), Loading and unloading print, pedal switch electric control positive &negative.

2, Printing pressure roller

(1), Diameter 176mm for phi.

(2), Steel surface grinding, hard chromium plating.

(3) And do balance correction and smooth operation.

(4), Printing pressure roller clearance dial manual adjustment, adjusting range 0-12mm.

3, Deliver paper upper and lower roller

(1), The top roller: for 87mm phi thick wall diameter steel, match three paper-feeding ring.

(2), Bottom rollers: diameter 116mm thick wall pipe for phi, surface grinding, hard chromium plating.

(3), Deliver paper roller clearance dial manual adjustment, adjusting range 0-12mm.

4, Steel anilox roll

(1), Diameter 212mm for phi.

(2), Steel surface grinding, the suppression of anilox hard chromium plating.

(3) And do balance correction and smooth operation.

(4), The number of strokes for 180, 200, 220, 250 mesh and commands.

(5), Cooperate paper-feeding system pneumatic type automatic lifting devices. (give paper anilox roll down and plate contact, stopped sending paper anilox roll up and plate separation).

(6), Anilox roll attached sphenoid clutch, evenly ink and wash ink is easy and fast.

5, Ceramic anilox roll (choose configuration: mark-ups 3 million yuan/branch)

(1), Diameter 212mm for phi.

(2), Steel surface coating ceramic grinding, laser engraving anilox.

(3), The number of strokes, 280, 300 meshes 250 commands.

(4), Than steel anilox roll wear-resisting, long service life.

6, Rubber roller

(1), Diameter 202mm for phi.

(2), Steel surface package wear-resisting rubber, and balance correction.

(3), Rubber high special grinding, the ink effect is good.

7 and phase adjusting mechanism

(1), The planet type gear structure.

(2), Printing 360 ° phase electric digital adjustment. (functioning, and stop all can adjust)

(3), Electric adjustment transverse position, adjust the distance 14mm altogether.

8, Ink circulation

(1), Pneumatic type diaphragm pumps, stable for ink, operate and maintain simple.

(2), Printing ink filter, filtering impurities.

(3), Plastic ink tank.

9, Printing phase fixtures

(1), Assolenoid style brake institutions.

(2), When machines, adjusting the phase separation or brake institutions, maintain the original limit rotational ghe gear position anchors.

,Slotting Unit

1 And line pressing device

(1), trunnion 105mm, surface grinding for phi. Hard chromium plating, moving smoothly.

(2), Do balance correction and smooth operation.

(3) And line pressing round clearance dial manual adjustment, adjusting range 0-12mm.

2, Slotting knife block move transversely adjusting mechanism

(1), Trunnion 156mm, surface grinding for phi, hard chromium plating, moving smoothly.

(2), Slotting knife width is 7mm.

(3), Alloy steel material by heat-treatment grinding tooth-type slotting knife, hardness and toughness and taste.

(4), Alloy steel material by heat-treatment grinding trimming cutter, blade sharp, high accuracy.

(5), Tack wheel, slotting knife block shifting position adjustment, using electric machinery couplet of adjustment.