Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Straightening Machinery

1.maintain,repair, service and retread of steel tube - details see: https://www.machineto.com/full-automatic-construction-steel-tube-straightening-10165788

Product usage: maintain, repair, service and retread of steel tube

Product type: brand new

Name: new type full-automatic construction steel tube straightening derusting paint

Model: 48-1221

Application scope: Ø48MM steel tube

Motor power: 4KW

Voltage: 380V

Rotate speed: 8 meters/min

The Max length of straightening steel tube: unlimited

The Min length of straightening steel tube: 1 m

The Max camber of straightening steel tube: 95°

Total weight: 960KG

Features of steel tube straightening derusting paint:

1. 1. High speed, high efficiency! It can finish 6 meters per minute. Straightening, derusting and brushing paint will be done at the same time.
2. 2. The mothod of 360°single brushing high-speed revolution makes it faster and more cleaner to remove the cement and rust.
3. 3. The scope it can straighten is the bending of Φ48 -Φ51(the bending is 0°- 90°). Straightening effect:≤1°.
4. 4. Main motor power: 7.12KW

Weight: 960KG

Dimension(L*W*H):2430*900*1100mm

Main function of the machine:

Straighten the steel pipe/steel bar

Removing the rust on the surface of the steel pipe

Remove sand ,soil on the surface of the steel pipe

Paint the surface of the steel pipe

Main usage of 48 type steel tube straightener:

The machine is suitable for the factory for prefabrication of cement and construction site. Straightening wire rod of the hot rolled round steel bar, and cutting into the required length.

The requirement of the steel bar that needed to be straightened:

1.It couldn’t straighten the steel bar that with bamboo joint and the excircle of the steel bar should be smooth and round.

2.The diameter of the steel bar should be among Φ4-Φ8mm.

3.The material of the steel bar is A3,the intersity limitation is σb400MPa.

4.If the steel bar is not smooth or not round, the diameter of the steel bar will be decreased in the permitted range.

5. For the φ3mm steel bar, onlywithin 4 meters the cut-off machine could be straightened.