Home  >  Industrial Supplies  >  Energy Saving Equipment

biomass burner merits:, 1.low operating cost, 2.pollution-free, 3.stable quality,long service life, 4.high degree of automation - details see: https://www.machineto.com/full-automatic-biomass-burner-10213392

Full-Automatic Biomass Burner

Multi-fuel options:burn various biomass raw materials or molded biomass particles ( Wheat straw, rice straw, corn stalks, corn cobs, peanut shells, cotton stalks and etc. of the crop, as well as branches, leaves, bark, roots, wood chips, bamboo powder, sawdust and other leftovers of forest products, which are cheap and inexhaustible).

Features of Full-Automatic Biomass Burner

1. Low operating cost

The wood chip pellet fuel used is renewable resource with extensive source and low cost. Its operation cost is only 40% as high as the cost of the diesel oil, 50% as the heavy oil, and 30% as the natural gas.

2. Non-pollution, remarkble environmental benefits

Adopting the half gasification high temperature combustion mode to make the fuel burning sufficient (wood tar is also in gaseous until the combustion is over), with no black smoke production and wood tar emission. The national generalized green renewable biomass wood pellet fuel is used, so that SO2 emission is almost zero, dust emission concentration is lless than 50 mg/m3, blackness is less than ling mann I level, and all the indexes meet environmental protection standard of the national first class area. Futhermore, it can achive completely dust free emission after the dust treatment of the equipment used, and is the most environmental combustion equipment.
3. Highthermal efficiency, strong output

Our combustion machine adopts boiling half gasification combustion and tangent spiral-flow type air distribution design, to make the biomass fuel convert and burn sufficiently, and the thermal efficiency can reach 90%. Besides, there are larger than 60 mm refractory insulating material in the gasification chamber, to make the heat of the gasification chamber not easy to spread out, greatly improving the thermal efficiency of the combustion engine .
4. Safety and stable

Water shortage, over temperature etc multiple protection, unique isolation device, and correct using won't cause the danger of tempering. Good effect of heat preservation make the appearance temperature of the the biomass combustion engine gasification chamber close to the room temperature, without the risk of scald.

5. Stable quality, long service life

The inner tank of the gasification chamber is made by unique high temperature resistant heat insulation material, with high temperature oxidation resistance characteristics and stable physical characteristics, and that its service life is five times as long as the commen refractory material.
6. High degree of automation,more advanced,more convenient

Adopting automatic feeding, coupled with our own full-automatic control panel makes the biomass combustion engine realize one key button operation, with full-automatic operation of blowing (blowing off ashes on the fire grate), feeding, size fire conversion and shutdown. So the operation is just simple and convenient.
7. High heating temperature

The flame of the combustion engine is stable, and the high temperature period can reach 1300 degrees.

8. Unique appearance design

The overall design is neat and beautiful, and has special maintenance door, so that maintenance is convenient.

Wide use : widely used in boiler, die-casting machine, industrial furnaces, kitchen

equipment, drying equipment, and other heating equipment. Especially used in 0.2-4T

oil, coal or wood boiler of energy saving transformation.

Technical parameters

Model	Rated head (10000kcal)	Thermal efficiency	Power consumption (kw)	Dimensions			Weight (kg)	Raw materia consumption (kg/h)
				Length (mm)	Width (mm)	Height (mm)
HJ-30	15-30	90%	0.9	1610	880	1420	650	50
HJ-50	20-40		1.3	1650	930	1470	780	80
HJ-650-S	30-50		1.7	1700	970	1520	860	100
HJ-750-S	40-60		2.3	1750	1030	1570	980	120
HJ-1000-S	50-70		3.2	1910	1100	1650	1150	140
HJ-1500-S	60-90		4.5	2090	1200	1800	1350	180
HJ-2000-S	90-120		5.5	2270	2500	1890	1570	240
HJ-2500-S	110-150		6.2	2300	2700	1910	1900	300
HJ-3000-S	140-180		7.2	2500	2900	1980	2430	360
HJ-4000-S	160-240		8.5	2700	3100	2100	2890	480