Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Rotary Drying Equipment

Stainless steel rotary dryer:, 1 High extensible ability, 2 low energy consumption, 3 high efficiency, 4 reasonable structure - details see: https://www.machineto.com/food-material-processing-machinery-stainless-steel-rotary-dryer-10295045

food material processing machinery Stainless steel rotary dryer

The brief introduction :

The rotary dryer consist of gyrator, shovelling plate, gear, supporting device and gasket ring and other components. The dryer is a slight tilt cylinder with horizontal direction , the material from one end of the higher to join, and high temperature hot gas and material flow into the cylinder together, with the cylinder rotation, the material run to the lower end due to the effect of gravity.

There are the plate inside of the cylinder wall which take the material up and down, and increase the contact surface area between the material and airflow to improve the drying rate and to promote the material forward. Dried product was collected from the bottom of the lower part.

The features :

The rotary dryer is with strong dealing capacity, low fuel consumption, low drying cost. Dryer is charactered with high temperature resistance, and use the high temperature hot wind to make the material rapid drying. Strong scalable capacity, design considerations of the production margin, so even a small increase in production, but also not need to replace the equipment.

The equipment is heart type tug structure, good cooperation between the tug and the rolling ring that greatly reducing the wear and power consumption. The specialized designed catch wheel greatly reduce the horizontal thrust caused from the equipment tilting. Strong anti-overload, cylinder running smoothly, and high reliability.

The scope of using:

1: chemical, mining,metallurgical and other industries,such as ore, slag, coal, metal powder, clay, diatomite, kaolin.

2: Agriculture, feed, fertilizer industries, such as stalks, grass, sawdust, leaves, fish meal, corn, rice, wheat, corn starch sauce, starch slag, vinasse, dregs, pomace, soy sauce residue, bagasse, grass charcoal, organic compound fertilizer, sludge, waste of aquatic products, wastes in the food factories, slaughterhouse waste, organic fertilizer, inorganic fertilizer, phosphate fertilizer ammonium sulfate.

3: For the drying of the powder with special requirements and granular materials. Such as: various crystals, light calcium carbonate, active floridin, magnetic powder, graphite, inorganic slurry, argil, line slurry, mineral slurry, phosphorus slag, red mud from aluminium plant.

4: Materials which request low temperature drying and bulk continuous drying.

The main technical parameters:

Type (mm)	Lean (%)	Revolving speed (r/min)	Inlet temperature (°C)	Power (Kw)	Cubage (m3)	Throughput (t/h)	Weight (t)
Φ600×6000	3-5	3-8	≤700	3	1.69	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	4.01	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	5.02	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	7.85	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	11.30	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	13.56	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	21.19	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	30.52	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	45.59	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	68.38	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	75.98	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	90.43	18-30	60
Φ3000×20000	3-5	1.5-5	≤800	55	141.3	25-35	78
Φ3000×25000	3-5	1.5-5	≤800	75	176.6	32-40	104.9

our certification: