Home  >  Industrial Supplies  >  Boiler Parts

1.Type: for 55G, 30G & 5G, 2.Material: Silicone rubber, 3.Features:easy install and flexibility - details see: https://www.machineto.com/flexible-silicon-rubber-drum-heater-10210958

BEEHE drum and pail heatersBEEHE drum and pail heaters can provide practical, efficient means of freeze protection, viscosity control and maintenance of materials at elevated temperatures. BEEHE drum and pail heaters conduct heat through the drum wall to the product inside. Adjust the thermostat to automatically maintain the correct temperature. We have alll kinds of drum and pail heaters for various sizes, from 5-gallon drum and pail up to a 55-gallon drum and pail. Drum heaters can operate at higher temperatures and work faster on metal drums. We also have more gentle drum heaters for your plastic and fiber drums.

heating element in BEEHE durm heater is laminated between two layers of 0.6mm fiberglass reinforced silicon rubber and has an adjustable thermostat that goes from 50° F to 410° F (10° C to 210° C). Each heater band is equipped with a six-foot cord set (230 Volt heater bands without a plug). A built-in metal screen is grounded electrically for safety. All heaters are high potential dielectric tested at 1500 volts at the factory. Drum heaters are available with either a 115 or 230 volt rating.

BEEHE drum and pail blanket heaters

drum blanket heaters provide more efficient, more uniform heating with better temperature control. Rugged aluminized cloth has 1" of fiberglass insulation for less heat loss and increased worker safety. Provides outstanding freeze protection, as well as temperature and viscosity control. Velcro fasteners make installation easy for a single person.

Typical Applications BEEHE drum and pail heaters and drum and pail blanket heaters is used for Maintain liquid temperatures in water purification systems, oil drum heaters to raise and maintain temperature during ,Maintain liquid resin at optimum temperature

BEEHE drum and pail heaters and drum and pail blanket heaters is used for Maintaining liquid resin at optimum 85-90 degrees Fahrenheit in resin spray unit for modeling reinforced thermosetting resin piping systems.

BEEHE drum and pail heaters and drum and pail blanket heaters is used for Maintaining viscosity of chemical binder in sand casting mold operation. Chemical action of the binder causes sand grains to adhere to each other for a cleaner, smoother mold.

The specification of Built-in Thermostats

Optional built-in thermostats are fully adjustable over the operating range of the heater and feature aluminum bronze adjusting screw and high strength silicone rubber protective covering. Standard calibration tolerance is+5% of the calibration temperature.

Easy to attach drum heater to drum

Always clamp the band heater around your drum prior to switching it on.