Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Spray Drying Equipment

1.disc spray dryer, 2. reach GMP standard, 3. CIP system can add as demands, 4. steam ,electrical power, gas , as heat source - details see: https://www.machineto.com/flavoring-centrifugal-spray-dryers-10295510

1.Principle of Work

After filtering and heating, the air enters into the air distributor at the top of the dryer.The hot air enters into the drying chamber in the spiral form uniformly. By passing through the high-speed centrifugal atomizer at the top of the tower, the material liquid will be rotated and sprayed into extremely fine mist liquid beads. Through the very short time of contacting with hot air, the materials can be dried into the finished products. The finished products will be discharged continuously from the bottom of the drying tower and from the cyclone separator. The waste gas will be discharged by blower.

2.Dried Samples

Foodstuff :amino acid, vitamin, flavoring, protein, dried milk, pig blood powder, soy powder, coffee, tea powder, glucose, potassium sorbate, pectin, essence, vegetable juice, yeast, starch etc.

Ceramics:alumina, zirconia, magnesium oxide, titanium oxide, magnesium titanate, pottery clay, china clay, all kinds of magnetic porcelain and metal-oxides etc .

Chemical Products:dispersed dyestuff, active dyestuff, organic catalyst,white carbon black, detergent powder, zinc sulfate, sodium metasilicat, potassium fluoride,calcium carbonate, tribasic potassium phosphate, inorganic catalyst and all kinds of waste liquid

3.Technical Parameters

Item	Data
	TPG5	TPG25	PG50	TPG100	TPG150	TPG200	TPG500	TPG1000
Water evaporation amount (Kg/h)≥	5	25	50	100	150	200	500	1000
Inlet hot air Temp(°C)≥	220
Outlet air Temp(°C)≤	90
Heating way	Electric		Electric plus steam		Oil , gas , furnace
Clean degree of system	300 thousand level
Automizer disk diameter (mm)	50	108	120	130	150	150	150	190
Atomier rotate speed (r/min)	35000	20500	17600	17600	15500	15500	15500	11570
Product yield	About 98.5%

Note:The date is changed in accoridance with customer’s requirement, the above data is for reference only.