Fiber cement board production line/ MGO board making machine

Automatic fiber cement board produce machine - details see: https://www.machineto.com/fiber-cement-board-production-line-mgo-board-making-machine-10075224

Condition:New	Application:building	Automatic Grade:Automatic	Production Capacity:100
Place of Origin:Jiangsu China (Mainland)	Brand Name:CX	Model Number:CX1200	Voltage:380
Power(W):70KW	Dimension(LWH):31M	Weight:20T	Certification:CE
Warranty:1 YEAR	After-sales Service Provided:Engineers available to service machinery overseas

contact supplier for Fiber cement board production line/ MGO board making machine

1.Board Making Machine:

2. Board cutting machine

Ⅰ. Project Feature:
1. The source of the production raw materials is widely with no regional restriction. The product is made of cement, sands, fly ash, many kinds of insulation materials, Chopped fiber or fiberglass cloth and etc. The board is formed one-time by the machine. It owns easy operation, low production cost, small investment and fast effectiveness.
2. The equipment has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. It can produce according to different customers' request like size (length* width*thickness) , material .

Ⅱ. Equipment Feature:
This machine adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing. The equipment runs stably with high automatic degree, and the specification of its product can be adjusted arbitrarily. The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness. The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.

Main Technical Parameters :

A. Automatic board making machine:

1. Board size of making: 1) MGO board 2500×1300×(3-10mm)

2) Fiber Cement board 2500×1300×(30-80mm)

2. Work speed: 5m/min, can be adjustable

3. Transportation rollers: Enclosed bearing dustproof, waterproof roller diameterØ60 × 3mm thick, hard chrome plated.

4. Belt transportation rollers: No.45 steel seamless pipeØ164 × 10mm, hard chrome plated.

5. Drums pressure rollers: No.45 steel seamless pipeØ215 × 10mm, chrome plated.

6. Drive sprocket: P = 25.4 and P = 19.05, P-15.88 tooth surface hardening CHR58 black surface treatment.

7. Transportation belt size: Ring PVC plastic with a 80 × 5mm thick.

8. Configurable Power:

a) Vacuum pump: 1.5KW

b) Reducer of fast feed in mould board: 1.5KW

c) Reducer of main drive: 5.5KW

d) Reducer of push feed in board: 1.5KW×2

e) Reducer of auto-tracking cutting: 0.37KW+1.5KW

f) Hydraulic station of lifter: 1.5KW

g) Dimensions: 31000×4800×2100mm

B. Auto board four-sides cutting machine:

1. Size of cutting board: Thickness: 3-100mm

TD: (2500×600)mm×2pcs

MD: (600×600)mm×8pcs

2. Work speed: 5-10m/min

3. Transportation rollers: S205 Semi-closed, unidirectional double sprocket, roller diameterØ60 × 3mm thick, hard chrome plated.

4. Belt transportation rollers: No.45 steel seamless pipeØ130 × 10mm, hard chrome plated.

5. Transportation belt size: Ring PVC plastic with a 80 × 5mm thick.

6. Drive sprocket and chain: main drive P = 25.4 fast transmission P = 12.7

7. Rubber roller of transportation of cutting:Ø130 × 10mm, adhesive rubber

8. Size of round cutter:Ø400 × 3.5mm

9. Configurable Power:

a) Reducer of TD: 5.5KW

b) Cutting motor of TD: 7.5KW

c) Transportation reducer of MD cutting

d) Cutting motor of MD: 11KW

e) Reducer of fast transportation: 1.5KW

f) Hydraulic station of lifter: 1.5KW

g) Cleaner: 5.5KW× 3

h) Dimensions: 22000×2000×1000mm

Equipment components and price list:

1. Board Making machine Line

No.	Name	Function	Size (mm)	Power(KW)	Quantity(set)
1	Slurry mixer	Mixing cement mortar of up and own materials	2300×820×820	3	2
2	Double-shaft mixer	Mixing middle materials	2800×1500×1300	18.5	2
3	Crusher	Crush and collection material after cutting	1960×880×1070	11	1
4	Duplex units feed in mould board	Automatic feed-in mould board on the main formed units, no need by manual, can reduce labor, improve work speed.	4800×3100×2800	1.5	1
5	Main formed units	It includes all of device of automatic feed-in cement mortar, fiber cloth, spreading, one-time forming and etc.	29000×1800×1500	11.5	1
6	Nylon film device(Or oil brusher)	It can adhibit the PVC paper on the mould board by automatic. (Or brush the oil on the mould board)	2700×1600×800	1.1	1
7	Automatic tracking cutting device	It can cut the product on production line when it’s wet, and it will not hurt the product and mould board, reduce the labor, low labor intensity .	4500×2000×1450	2.45	1
8	Hydraulic lifter of receiving board system	It can load the formed board on the form rack, reduce labor, reduce hurting the board when by manual, and improve automatic.	2700×3800×1700	9.6	1
9	PLC Control system	Control the production line automatic.	750×500×1800		1

2. Board four-sides cutting machine Line

No.	Name	Function	Size (mm)	Power(KW)	Quantity(set)
1	Automatic four-sides cutting machine	It can cutting the board as fixed size from four sides, assure the edge of board smooth, neat and reduce tolerance, improve the aesthetics of the board.	13200×5000×1000	9	1
2	Hydraulic lifter of unload board system	Loading the formed board on lifter, reduce labor and the hurting boards by manual.	2700×3800×1700	3	1
3	Bag-type vacuum cleaner	Clean the dust when cutting the board, reduce the pollution of the environment. Also it can collection the dust for recycle, reduce cost.	1200×600×1800	5.5×2	2
4	PLC Control system	Control the production line automatic.	750×500×1800		1

1. Make board:
Lift the saw material----mix the saw material----feed in with mould board----brush the oil on the mould board----put down-layer fiber----feed in main material----put up-layer fiber----roll form----exact roll form----fixed lenght size cutting----transport Semi-manufactured board----lift on hydraulic platform----3tons forklift transport to curing
2. Cutting board:
After curing----take out from the mould board----Vertical cutting into size 1200*2500mm*1pcs----Crossing cutting into size 1200*2400mm*1pcs----stacker

1/Chenxing are to provide warranty of free replacement parts for defective materials and/or labour for a period of 12 months.

2/Defective parts shall be Photographed & E Mailed to Chenxing for inspection.

3/Cost of shipping for replacement of defective parts to be paid 100% to Chenxing for first year

4/Repairs will not be performed free of charge even during the guarantee period in the following circumstances:

(A) Damage occurs due to a natural disaster.

(B) Malfunction occurs due to user error.

(D) Malfunction occurs due to further movement or shipment after installation.

Jiangsu Chenxing machinery Company is a joint and science & technology enterprise, also a professional produce construction machine company; we specialize in researching, producing and selling construction machine. Electrical Technology Co., Ltd. Nantong Super shield is established in 1975s. We have two branches: Wenzhou Chenxing Machinery Co., Ltd (about 4000 m2); Electrical Technology Co., Ltd. Nantong Super shield (about 27000m2).Jiangsu Chenxing machinery have built research center, we will develop and make more new products for our customers.

We insist on running principle of "creativity in technology, integrity in management", service principle of "to be always integrity continuous improvement in service". chenxing machinery company is widely praised by its high-grade technology and excellent service. Our product is not only popular in domestic market, also selling well abroad. Jiangsu Chenxing machinery will try our best to make profit for our customer.

We own the products: Garage door pu sandwich panel production line, PU sandwich panel production line (wall & roof), cold roll forming machines, Fiber cement board machine, MGO board machine line and etc.