FDX-A pet tracking microchip ISO11784/785
Place of Origin:Shanghai China (Mainland) | Brand Name:Freevision | Model Number:animal microchipping | Material:Bio-glass Schott 8625 |
Size:1.25x7,1.4x8,1.5x8,2x6,2x8,2x10,2x12mm,etc | Operating Frequency:125KHz,134.2KHz,13.56MHz | Chip IC:EM4200,EM4305,Hitag S256,NTAG203,etc | Standard:ISO11784/785 |
Format:FDX-A, FDX-B, HDX | Encoding:Yes, with ICAR number encoded | Application:animal identification/tracking | New product 1:1.25x7mm in FDX-B format |
New product 2:NTAG203 HF NFC rfid glass tag |
FDX-A pet tracking microchip ISO11784/785
Pet microchip is a special design for animals like pets or wildlife. It can be put under animals’ skin by a special syringe or via surgery. Also, it can be embedded in objects easy for an extreme condition because it’s high resistance 12mm Glass pet chip .
The rfid glasstag with syringe 2.12x12mm and 1.4x8mm have been developed for subcutaneous injection, which is widely used for small animal identification. This glass tag can be used to identify any any pet like cat, dog, furret, horse, fish and exotic animal. All products conform to ISO standards and are available with parylene coating to prevent migration of the tag once implanted.
1.4x8mm now is the smallest sized glass transponder, widely used for tagging fish, mice, etc such very small animals; while 2x12mm is the common sized and popularly used on the market for dog, cat, horse, etc. At so far, we just developed a new product, 1.4x8mm in FDX-A format, as far as we know that, 1.4x8mm could only be FDX-B format because of the big rfid chip's size, so, we now are the unique manufacturer who can supply FDX-A glass transponders at the smallest size 1.4x8mm!
For rfid glass tags used for animal identification(or tagging animals), there are 3 standard:
ISO11784/785 FDX-A, FDX-B and HDX.
Here are the size for different format:
FDX-A: 1.4x8, 1.5x8, 2x6, 2x8, 2x10, 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm
FDX-B: 1.4x8, 1.5x8, 2x6, 2x8, 2x10, 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm
HDX: 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm
In a word, RFID glass transponder tag is an easy solution for animal identification and tracking. Made of high quality Biocompatible glass, compaly with ISO11784/785 FDX A/B, HDX; our rfid glass tags are safety and could work with excellent performance, 5-8cm with our readers, or even longer upon readers' antenna and power.
Specifications:
PRODUCT CODE | animal tracking identification microchip |
Frequency | 125KHz/134.2 ± 2 KHz |
Standard and Protocol | ISO 11784/11785 |
Transmission Principle | Full Duplex (FDX-A/B), Half Duplex(HDX), EM ID |
IC Type | T5577, EM4305, HITAG S256, CET5999, EM4200 |
Data Memory | 330bits,512bits,256byte,1024bits, 64bits |
Dimension | 1.4x8, 1.5x8, 2x6, 2.12x8, 2.12x10, 2.12x12, 3.85x32, 4x34mm |
Reading Range | 6-10cm by our handheld animal reader H20-F-G1; 30-50cm upon our long range reader PI-80 |
Operating Temperature | -25oC to 85oC |
Storage Temperature | -40oC to 90oC |
Weight | 95 ± 20 mg for 2x12mm; 34mg for 1.4x8mm |
Write Endurance | > 1,000,000 cycles |
Memory Retention | > 20 years |
Case Material | Cylindrical Bio-glass Schott 8625 |
EMC | Not affected by Normal Electromagnetic Interference or X-Rays |
Signal Penetration | No known Blockage by non-magnetic material |
Power Source | No Battery Required |
What is RFID Microchip?
RFID Microchip also known as a glass transponder, is about a size of a grain of rice. The transponder which is coded with a permanent code, is implanted under the animal's skin for identification purpose. Using Radio Frequency, the animal can be identified by using a RFID scanner.
What are the benefits?
1. Unique identity for every livestock and pet.
2. Import and export control.
3. Lost pet can be easily traced back to it's owner.
4. Veterinarians are able to keep the animal's heath record.
5. Easily implanted and no impact on the animal.
6. Suitable for use in extreme conditions.
7. Coupled with software, the RFID tag is a must inmanagement of animals, either livestock or household pet.
Why are our Microchips much cheaper?
1. Factory strategically located.
2. Direct from our factory.
3. Sophisticated cost savings production process.
How we deliver superior quality Microchips?
1. Equipment and Machines imported from Germany, Japan, USA etc.
2. Strict quality control.
3. Microchip tested and inspected individually.
4. Use only top quality material to manufacture microchips.
Please refer to the following pictures:
Packaging Detail:Option1: Standard safety packing Option2: Standard export cartons Option3: Neutral or customized |
Delivery Detail:About 5~7days |