Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Other Welding Equipment

Rework Station, 1. Infrared soldering technology, 2. Easy to target most component removal and re-work., 3. Fast Shipping - details see: https://www.machineto.com/fast-shipping-infrared-solder-station-t862-smt-smd-bga-rework-station-suitable-for-the-entire-component-10137913

Rework Station SW-T862

Main Features:

♥ Unlike Air Re-Work systems, The T862 uses an Infrared source and opticsto target heat to

individual components without dislodging other SMT parts by way of eddies air currents.
♥ Infrared soldering technology with independent exploration capabilities via one focus lenses which is included in the package.
♥ Technician focused infrared heat is easy to target most component removal/replacement and re-work.
♥ The Workstation has a120×120mm a 800Wcontrolled Pre-heating System.
♥ Infrared heat source bulbs are long-lived, in-expensive and easily replaced.
♥ Processor controlled set-point regulated temperatures with thermocouple feed-back.
♥ Integrated and adjustable Infrared (IR) eye protection.
♥ The T-862 system also contains a temperature controlled touch-up iron and stand.
♥ Extra soldering tools are not necessary to solder/unsolder and re-work Surface Mount

Technology (SMT) components 18*18cm in size.
♥ Training is illustrated in factory provided video.

♥ Fast shipping. Can ship from USA,GBR,GER.

Technical Parameter:

Work bench size	410x316mm
Working Voltage	AC110V/60Hz / AC220V/50Hz
Output power	600W
Infra-red lamp body temperature adjustable	100°C-350°C
Preheating plate size	280x270mm
Preheating dish temperature adjustable	60°C-200°C

Instrument Inventory:

T-862 Chassis	1
PCB Board holder	1
936 Searing-iron	1
936 searing-iron rack	1
Lamp Body and Lens(D=28mm)	1
Eye protection(IR Filter)	1
Cell guide	1
Focus holder	1
Focus holder control knob	1
Fasten nut for focus holder	1
Steady ring	1
Fasten nut for steady ring	1
Power Cable (110VAC or 200VAC)	1
5mm Fuse, 10A 250VAC (Spare)	1
CD User Manual w/Video	1
Detailed English instructions and illustrations	1

Maintenance:

♥ At all times – Insure the light body cooling fan is unobstructed and clean.

♥ Use a little machine oil. Lubricate the focus holder and cell guide to inhibit rusting, keep them ease to operate.

Warnings:

♥The T-862 System creates temperatures in excess of high degrees via Infrared Light. Wear appropriate eye protection or any device within.

♥The T-862 system when using this machine. After use,do not cut the power immediately, confirm the light body is cool-to-touch, Turn off thepower switch, then place the system in airiness & safety storage.
♥Do NOT use this system or any associated device in an environment conducive to fire or electrical overload.
♥Disconnect the AC Power Plug when not in use.