Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Spot Welders

Factory Sale MD-1001A 110V Spot Welder Machine Equipment,Mini Metal Spot Welding Machine,Spot Welder For Battery - details see: https://www.machineto.com/factory-sale-md-1001a-110v-spot-welder-machine-equipment-mini-metal-spot-welding-machine-spot-welder-for-battery-10142339

Factory Sale MD-1001A 110V Spot Welder Machine Equipment,Mini Metal Spot Welding Machine,Spot Welder For Battery

Welcome to do business with Shen zhen Mingda Technology Co.,Ltd

The welding thickness of MD-2005 is 0.01~0.12mmnickel plate!!!

How to use:

1. Working principle:

Portable precision Micro computer control battery welding machine using double point flow welding principle, work two electrode pressure workpiece so that the two layer metal electrodes in two under pressure to form a certain contact resistance, and the welding current from the electrodes through another electrode contact resistance in two points forming the instantaneous heat welding, and the welding current moment from the other electrode along the two workpiece flow with the electrode to form a loop, and the internal structure of the parts to be joined.

2. Features:

This machine is the top type AC pulse dual-little welder,it has the following characteristics:

1. Beautiful appearance and Lightweight

2. weld mark in beautiful appearance, small spark, no black mark( the battery won’t come of phenomenon f), completely overcome the lithium battery spot welding after the onset of low pressure and water phenomenon, is your ideal equipment for production of assembled battery.

3, the control circuit adopts thyristor firing pulse circuit and digital control circuit. The parameters are set for digital, so the parameter adjustment is intuitive and accurate.

4, the pressure welding needle and two needle distance can be adjusted independently, and convenient adjustment, ensure the welding pressure is stable and reliable.

5, welding switch is the only use of photoelectric switch.

6, a unique fault test function, can self diagnosis and maintenance.

3. Application range :

1.The connection between wire and conductive pcs

2.Various types of rechargeable batteries connection with Nickel plate which thickness is0.01~0.12mm.

3.Peripheral accessories, stainless steel tableware connection

4.Strap welding

4.Technical parameters:

1.Input power supply: AC220V ± 10%50Hz ±2Hz

2.Rated power:1KVA

3.Welding current:0-40A

4.Electrode stroke:20mm

5. The control mode: double pulse

6, The whole machine weight:6.5KG

7, Dimensions: L260× W160× H200( mm )

8, apply to the object: for 0.03mm-0.12mm nickel or nickel belt connection with metal plate

5.The safe use and maintenance:

1.Welding machine should be reliable grounding.

2.Two electrode can not short circuit.

3. when Welding test, energy should be from small to big.

4.plug should ensure the welder POWER in the off state.

5.keep electrode cleaner.

6.Close the power if the machine is not working in long time

7. Before open the machine electrode cannot be put together

6.Common fault list:

No.	Fault phenomenon	Reason
1	Boot no display	30A fuse off, power is not connected
2	No welding current	Discharge control does not open
3	No welding current ,showed Normal,long time press(up and downbutton), Alarm lamp appear flicker	The trigger switch not contacted well, or damaged
4	Boot send a " bang " sound	Normal ( machine itself discharge )
5	Boot Tripping Input power supply insurance	Power leakage switch is too small, (note it should be above 20A)

Note:

The above mentioned fault in the control circuit failure are likely to produce, please note

when current is adjusted to 30A, and in continuous welding state, it will burn out fuse. This is caused by protection principle of battery welding machine, but it won’t affect the quality of the machine. The output voltage only is 3V, please rest assured that the use of!

About us: