Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Dividing Head

1.Universal dividing Head, 2.can divide in any angle by the direct, in-direct, or different methods. - details see: https://www.machineto.com/f11-160-universal-dividing-head-universal-dividing-head-for-milling-machine-10151416

F11-160 type Universal Dividing head,Dividing head for milling machine

Specifications

1.Universal dividing Head
2.can divide in any angle by the direct, in-direct, or different methods.

Features:

The universal index center has been designed to carry out all types of gear cutting. Precision dividing and spiral word with greater precision and efficiency than ever The center face can be tilted from a horizontal position of 90 degree down to – 10 degree from vertical,and inclinations can be read off a scale graduated in degrees. The center is built to highest engineering standards and is factory inspected and tested to assure complete satisfaction. The ratio of worm to gear is 1:40

Specification		F11 100A	F11 125A	F11 160A
		F12 100	F12 125	F12 160
Swivel Hight mm		100	125	160
Swivel angle of spindle from it's horizontal position (upward)		≤95°
Horizontal position(downward)		≤6°
Rotating angle of spindle for one complete revolution of dividing handle		9°(540 GRAD;1'each)
Min. reading of vernier		10"
Worm gear ratio		1:40
Taper of spindle bore		MT3	MT4
Width of locating key mm		14	18
Dia. Of short taper of spindle nose for mounting flage mm		41.275	53.975	53.975
Hole numbers on index plate	1st plate	24,25,28,30,34,37,38,39,41,42,43
	2nd plate	46,47,49,51,53,54,57,58,59,62,66
Change gear	Module	1.5	2
	teeth numbers	25,30,35,40,50,55,60,70,80,90,100
Individual indexing error of the spindle for one complete revolution of dividing handle		±45"
Cumulate error at any 1/4 periphery of spindle		±1'
Max.bearing kg		100	130	130
Net weight kg		(63)67	(104)110	(120)130
Gross weight kg		(75)79	(120)126	(139)149
Case dimensions mm		616*465*265	635*530*310	710*535*42

Contact:Candy Tian

Skype:haide800