Excellent Quality and Good Preformance Sand Rotary Dryer/Silica Sand Rotary Dryer with High Output
Condition:New | Type:Rotary Drying Equipment | Place of Origin:Henan China (Mainland) | Brand Name:chuangde |
Model Number:HG-1.2*12m | Voltage:220V/380V | Power(W):11kw | Weight:14.8t |
Certification:CE | Warranty:One year | After-sales Service Provided:Overseas third-party support available | Color:As your request |
Installation:Under our engineer's guide | Shell Diameter:1.2m | Shell Length:12m | Gradient:3-5° |
Rotational Speed:2-6r/min | Capacity:2-6t/h | Inter Temperature:≤700℃ | Material:Mn steel |
Main Market:North America, India, Korea ect |
Excellent Quality and Good Preformance Sand Rotary Dryer/Silica Sand Rotary Dryer with High Output
Introduction of Silica Sand Rotary Dryer
Rotary dryer is mainly used for the drying of materials like slag, clay and coal dust in building material industry or metallurgy industry, and leaching slag in metal beneficiation. In order to control the temperature of the dryer, a thermocouple which can show the temperature change of the dryer’s feeding and discharging ends is allocated on the feeding and discharging devices. This offers support for the better control of the working temperature (normal 350-380 centigrade) in the drum. Rotary drum dryer is used in the drying of graininess material, and sticky paste material or high moisture material by adding materials. Its advantages: great production capacity, wide rang of application, small flow rate resistance, large fluctuation range in manipulation and convenient operation. It is most used in the drying of sand, mineral powder, coal slurry, chicken manure and dairy manure.
Application of Silica Sand Rotary Dryer
Rotary dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry,
slag, industrial waste, and clay stone. Rotary dryer are widely used in building materials,
metallurgy, and chemical industry. Rotary dryer is handling by bringing it into direct contact
with a heated gas. The dryer is made up of a large, rotating cylindrical tube,the dryer slopes
slightly so that the discharge end is lower than the material feed end in order to convey the
material through the dryer.
Working Principle of Silica Sand Rotary Dryer
The heat source of dryer is from combustion devices. This dryer adopts direct flow heating method. So the material should be sent to the shell by the feed chamber and feed chute. After that the material will be pushed backward by the spiral shoveling plate. As the dryer is located with a tilt, the material flows to the end by the gravity and circumduction meanwhile it is shoveled repeatedly by the shoveling plate to the upper end then comes down constantly, forming an even curtain in the drum and exchanging heat fully with the hot current in the drum. With the material being raised and scattered again and again, the moisture is dried gradually. Finally it is dried totally.
Strcture of Silica Sand Rotary Dryer
Rotary dryer machine is mainly composed of shell, back and forth supporting wheel, feeding and discharging unit and gear cap. The accessories which are not in the the scope of this machine include firebox, feeding and discharging equipment, dust catcher, etc.
Technical Data of Silica Sand Rotary Dryer
Type (mm) | Gradient(%) | Rotational speed (r/min) | inlet temperature(°C) | Power (KW) | Prod Capacity (t/h) | Weight(t) |
600×6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
800×8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
800×10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
1000×10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
1200×10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
1200×12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
1500×12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
1800×12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
2200×12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
2200×18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
2200×20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
2400×20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
3000×20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
3000×25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |
Characteristics of Silica Sand Rotary Dryer
1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is
easytotransport and install.
2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone
reasonablyso as to improve the granulation effect .
3. Adopts assembled hoist board so as to exchange heat fully and lower the energy consumption .
4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance
and productivity efficiently .
5. The assorted combustion furnace is a type of energy efficient and has the characteristics of smaller
area , easy regulation and equipped with greenhouse
More Pictures
If you have any question, pls feel free to ask me!
Packaging Detail:Container |
Delivery Detail:Within 7-12 working days after receipt of your advanced payment |