Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Road Marking Removers

epoxy remover for concrete surface preparation, 1,Gasoline power, Japan or America, 2,Width:200-250mm Depth:5-8mm - details see: https://www.machineto.com/epoxy-remover-for-concrete-surface-preparation-10121117

epoxy remover

Ideal for

Removing traffic line and coatings;

Small, narrow areas or edges;

Sidewalk repair;

Floor preparation or cleaning;

Create non slip surfaces.

Performance

• Working width: 200mm, 250mm;
• Working depth: 3mm, 5mm, 7mm;
• Original gasoline engine: Honda, Kholer, B&S;
• With depth instructions scale dial, milling depth can be accurately adjusted;
• SKF ball bearing and casting bearing assembly;
• Vacuum and water outlet for dust free operation.

Parameter

Model	HWS190	HWS200	HWS255
Working Width	190 mm	200 mm	255 mm
Working Depth	3 mm	6 mm	8 mm
Power	7hp	9.5hp or 5.5kw	14hp or 7.5kw
Drum Rotation	Downcut	Downcut	Downcut
Drum Assembly	Changeable	Changeable	Changeable
Working Efficiency	70 m2/h	120 m2/h	160 m2/h
Depth Control	Yes	Yes	Yes
Num of Shaft	4	6	6
Packing(L*W*H)	100*51*97cm	105*54*103 cm	108*65*103 cm
Walking	Manual	Manual	Manual

Technical details:

1,More gasoline engine for choice: Original Honda, Kholer, B&S

2, More models for choice:working width: 190mm,200mm, 250mm, 300mm,350mm

3, six axis, a drum, special heat treatment; with TCT blades. Easy to replace the drum assembly.

4, The real picture after scariying concrete.

5, partdetails:

No.1, Four grade air filter prevent dust from outside. (Kholer engine is 6 grade air filter, and Honda engine is 4 grade air filter)

No.2, SKF casting ball bearing and V belt, which the engine power is sent to bearing.

No.3, Lift, down and adjust the height of drum.

No.4, Charge the drum assembly in the five minutes.

No.5, Vacuum and water port for dust-free operation; See the drum assembly under the machine.

...