Engine Oil Recovery and Oil Regeneration System( DYJ series)

Oil Regeneration, - Waste engine oil purification, - remove color, dirt, gas, water, carbon particles, deteriorated oxide, etc. - details see: https://www.machineto.com/engine-oil-recovery-and-oil-regeneration-system-dyj-series-10228730

Condition:New	Flow:30~250L/min	Working Pressure:less than 0.8Mpa	Place of Origin:China (Mainland)
Brand Name:MEIHENG	Model Number:DYJ-TB SERIES	Usage:Lubricant Oil	Voltage:380V, 220V, 110V, 400V, etc.
Power(W):25~54KW	Dimension(LWH):230018001980mm	Weight:1500kg	Certification:ISO9001
After-sales Service Provided:Engineers available to service machinery overseas	as needed:green

Engine Oil Recovery and Oil Regeneration System( DYJ series)

contact supplier for Engine Oil Recovery and Oil Regeneration System( DYJ series)

engine oil regenerating equipment

DYJ-TB Waste Engine Oil Discoloring and Oil Regeneration Equipment

Application:

DYJ-TB seriesWaste Engine Oil Discoloring and Oil Regeneration Equipment is used to purify the waste engine oil, it can efficiently remove the abrasive dust, foundry sand, impurities, moisture, organic acid and inorganic acid from the waste engine oil, and remove carbon particles, deteriorated oxide etc...Articulates from waste engine oil, and also remove gelatin and asphalt from the oil. It can break the emulsion and improve the color of the oil, make the purified oil's color approximate to the new oil, recover the oil's property and improve the engine oil's operation performance, reduce the abrasiveness, to assure the engine oil lubricating system operate normally, prolong the service life of the gas engine and the oil. It can save the cost of oil and save the fuel resource. It can be widely used in oil field, mine, metallurgy, electric power, traffic, manufacturing to filter hydraulic oil, machinery oil, cooling oil and engine oil which is used in vessel and automobile for oil regeneration purification treatment.
Characteristics:

1. Strong ability of filtering impurities refers to the characteristics of the waste engine oil: Heavy particle sand, much impurities, badly dirty oil, it combines magnetic filtration with densification filtration step by step.

2. It can remove the water and other harmful air in the oil.

3. Adopted step air-cooling and waste air filtration to deal with themixed air which had been pumped in the system.Increased the equipment's effective output, prolonged the life-span of the vacuum pump. It is not only protecting the vacuum pump, but also protecting the environment.

4. The system has the advantages of pressure mechanical filtration, vacuum filtration, and centrifugal filtration. It is not only overcome the disadvantage of plate oil purifier, but also can remove the acid, gas and emulsion that normal oil purifier and centrifugal oil filtration machine cannot do.

5. Adopt advanced fuzzy oil temperature device, set upper and lower limits of the oil temperature discretionarily. It makes the oil temperature control come true at the section to avoid heating alternating contactor working frequently, prolongs the service life of the contactor.

6. The machine has a perfect protection device. It monitors the temperature, pressure, vacuum degree, power cut, overpressure and low-voltage, prevents from the accidents effectively, and assures the machine can operate well.

Part 2 Main Technical Parameters of DYJ-TB Multi-function Lubricating Oil Discoloring Purifier

Item Name		Type Unit	DYJ-TB 30	DYJ-TB 50		DYJ-TB 100		DYJ-TB 150	DYJ-TB 200	DYJ-TB-250
Flow Rate of Oil In		L/min	30	50		100		150	200	250
Purification Capacity		L/8h	900	1500		3000		4500	6000	7500
Inlet(Outlet) Pipe Diameter		mm	32	32		38		42	48	60
Rated Total Power		Kw/h	25	32		38		42	46	54
Rated Heating Power		Kw/h	15	21		24		27	30	36
Average Power		Kw/h	16.5	22		25		30	36	42
Purification Cost per Ton		USD/T	16.666~83.333
Applied Power Supply		380V,50Hz, three phases four lines
Working Temperature		°C	30~160
Working Pressure		Mpa	≤0.8
Noise		dB(A)	≤75
Working Vacuum Range		MPa	-0.095~-0.06
Net Weight		Kg	680	800		960		1050	1300	1500
Overall Dimension	L	mm	1500		1650	1700	1850		2000	2300
	W	mm	1100		1300	1400	1450		1600	1800
	H	mm	1750		1800	1850	1850		1900	1980

Part 3 Oil Index after Purified by the Purifier

Non-Mixed Stowage National Standard Oil
Item	Unit	Acceptance Standards
Kinematic Viscosity	mm2/s	GB/T265
Density	(20°C)kgm3	GB/T1885
Flash Point	°C	GB/T3536
Pour Point	°C	GB/T3535
Acid Number	mgKOH/g	GB/T264
Mechanical Impurities	%	GB/T511
Water Content	mg/kg	GB/T0207
Color	Chromaticity Number	SH/T
Demulsification Properties	54°C(40-37-3)ML/min	GB/T7306
Remark:Inspection acceptance of Mixed Stowage Oil and Non-national Standard Oil shall be in line with our tested sample oil purified by our purifier.