Home  >  Construction Machinery  >  Building Material Machinery  >  Cement Making Machinery

we can supply active lime Production Line,from project design,installation to run test,Stability and lower maintaining - details see: https://www.machineto.com/energy-saving-quick-lime-kiln-production-line-quick-lime-plant-10077446

Active lime production linespecifications

1.Active lime production line
2.Capacity:80t/d~500t/d with rotary kiln/Vertical Kiln.
2.Fuel:Natural gas,heavy oil,diesel and etc

3.Raw material: Limestone

4.Product: Activated lime with particle size 0-10mm powder lime or 10mm-50mm lime lumps

5.More Safe For Workers

6.Air Flow and Higher Security

7.Suitable For Large-scale Plant

Qualified limestone stores in silos and be shipped through the pre-heater by the elevator into the silos which is on the top of the pre-heater. The pre-heater on the top of silos is consisted of top and bottom level meter controllers which control the feeding capacity. Then through the feed tube the limestone is distributed to the indoor compartment of the pre-heater.

The limestone in the pre-heater is heated to around 900 ° C by the kiln flue gas of 1150 ° C. At this time, about 30% of the limestone has been decomposition. Then the limestone is put into the rotary kiln by the hydraulic stem. In the rotary kiln the limestone sinters and decomposes into CaO and CO2. Then the decomposed limestone goes into the cooler and is cooled to about 100 ° C by the cold air and then is discharged. The 600 ° C hot air after heat exchange goes into the kiln and combusts with gas. The Exhaust gas blended with the cold wind go to the bag filter through the suction fan and then through the exhaust fan into the chimney.

The limestone out of the cooler enters into the lime storehouse through the vibrating feeder, chain bucket conveyor, bucket elevator and belt conveyor. Whether to carry out screening and other procedures depends on customer requirements.

Active lime Production Line,from project design,installation to run test,our company will send our senior engineers to do all service

Up to now, the traditional cement shaft kiln has been eliminated in most parts of the world, and the new type dry process active production line has been developing very rapidly. Compared with other active lime production lines, our new type dry process active lime production line has many excellent advantages:

* Saving energy and reducing emissions.

* Environmental protection and low consumption. Our production line can almost reduce dust emissions to zero.

* In traditional shaft kiln, one ton active needs to consume 100 kwh. But our production line can make waste profitable, the waste heat is collected to generate electricity, and that will resolve about 50% power utilization of active lime plant, thereby it will lower production costs most. Besides, our production line can realize the comprehensive utilization of resources, with good social benefits and economic effects.

We can provide our clients 100~8000 t/d dry process active lime production line. From project design, installation to run test, our company will send our senior engineers to do all service for our customers all over the world.

For more information about our active lime production line, please feel free to contact our company. Your any kind inquiry will be highly appreciated. We will reply to you within 24 hours for any enquiry.