Home  >  Farm Machinery  >  Farm Machinery  >  Biomass Briquette Machines

wood charcoal briquette machine, 1.High efficiency, 2.large capacity, 3.long service life, 4.easy operate - details see: https://www.machineto.com/energy-saving-perfessional-wood-charcoal-briquette-machine-10179210

Energy saving perfessional wood charcoal briquette machine

Introduction of wood charcoal briquette machine:

1.Charcoal briquette machine is mainly use to make wood logs,tree branch,bamboo,coconut shell,peanut shell.

atc.into charcoal.the final product is charcoal stick,the stick can be used inboiler combustion,generate electricity,

Domestic Heating.It is energy-saving and environment friendly.

2.Wood waste charcoal briquette machine from wood dust make the biomass material into briquettes. After the well preparement of raw metarial, briquetting is easy at right operation of biomass briquette press. When machine rise to over 300 centigrade, the material can be feeding continuously into briquetting press. First, the color of briquettes may be a little dark even black, but after a while, the color will be light to normal level coming out of biomass briquette machine.

Model	Power	Capacity	Weight	Dimension	Note
ZBJ50	11KW	120-150	450kg	1.68*0.72*1.25	Charcoal size:50mm
ZBJ50-2	15KW	180-200	550KG	1.68*0.72*1.25	Charcoal size:50mm
ZBJ60	15/18.5KW	200-240	620kg	1.68*0.72*1.25	Charcoal size:60mm
ZBJ70	18.5KW	280-350	680KG	1.86*0.72*1.32	Charcoal size:70mm
ZBJ80	18.5KW	320-380	750kg	1.96*0.72*1.32	Charcoal size:80mm

Raw material of wood briquette machine:
1. Raw material: Ground nut shell ,Sugarcane residue Caster Shells/Stalk Saw dust Coffee Husk Paddy Straw Sunflower Stalk Cotton Stalks Tobacco waste Mustard Stalk Jute waste Bamboo Dust Tea waste Wheat Straw Palm husk Soybeans husk Rice Husks Forestry wastes Wood Chips and many other Agro wastes.

2. This machine can be operated 16 hours per day.

3. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating.

Features of wood charcoal briquette machine:

Stick shape with different diameter.The density, strength and hardness of products are very high.

Our briquette machine with higher capacity and lower energy consumption.production moisture is 8-12% ,raw material size below 3-5mm This series of briquette machine is a new type of wood briquette machine,the finished products are more solid.

This Sawdust Briquette Machine with automatic temperature control system is designed to produce high density wood briquette stick from biomass.

Working principle of wood charcoal briquette machine :

1.fastening bolts, especially in the heating barrel set of three top wire, connecting and electrical power lines.
2 check bearing lubrication part.
3 check the supply voltage is normal.
4 no-load starting running 30 minutes, no card, touch the abnormal phenomenon, can be put into normal production.When the trial revealed abnormalities, should immediately stop, find out the reasons, troubleshooting and then makes no-load operation.
5 the temperature regulator adjusted to the required temperature, when the temperature reaches a predetermined temperature before starting, and amount of feed.
6 gradually increased feeding rate, until the production of qualified products, produced when the normal 30 minutes, can show trial run is successful, the normal operation of.
At the end of 7 to make the hopper feeder with no raw material , and after shutting down the machine immediately reversed for 1 minutes, so that the propeller material would be exit.
The machine body must be well grounded!!!

Final product of wood briquette machine:

This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.

The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge

The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on

The available length could be :20cm,30cm, 40cm, 50cm

The feature of the final product : Specific gravity: 1300—1900kg/m Calorific value: 4500—5000kcal/kg

About us:

Gongyi Xiaoyi Mingyang Machinery Plant is located in Zhengzhou City, which is the biggest manufacturing base of charcoal