Home  >  Metal Processing Machinery  >  Machine Tools Accessory  >  Chuck

electromagnetic magnetic Chuck, 1 For vertical Lathe machines, 2 OEM is available, 3 CE Approved, 4 Manufacturer - details see: https://www.machineto.com/electromagnetic-magnetic-chuck-for-vertical-lathe-machine-10145559

DYCC3 series Electro Permanent Magnetic Chuck for Vertical Lathe machine

Main features:

(1)DYCC3 series electropermanent Magnetic chuck with circular permanent magnet sucker,using the unique variable cross-section magnetic pole structural design ensures the outer diameter increase suction strengthens gradually.

(2)Dual magnetic circuit design,T-slot design of the magnetic field superimposed,Easy pad plus magnetic blocks(The users can make special-shaped magnetic blocks on their own according to the workpiece surface condition.Even if attracts gathers the surface is the attire which the curved surface also can use clamps the tool)

The overall drawing:

Main technical parameters

Type&Data	Magnetic pole number	Total magnetic force(≤KN)	Overall dimension(mm)			Weight(kg)
			D	d	H
DYCC3-500	12	70	500	60	70	95
DYCC3-600	12	100	600	60	70	135
DYCC3-800	16	160	800	150	80	290
DYCC3-1000	16	200	1010	200	80	460
DYCC3-1300	24	360	1260	300	90	680
DYCC3-1500	24	480	1520	500	100	1240
DYCC3-1600	40	600	1620	800	125	1560
DYCC3-1800	40	800	1820	800	125	2050

We can design and produce special-purpose non-standard products based on user special requirements

Electrical power in an instant after sucker magnet permanent magnet can be sucked into prison to locate the workpiece processing, reverse current is applied, you can remove the workpiece demagnetization, security, energy saving, easy to operate, no temperature variations, high machining accuracy. The product is equipped with power supply unit for charging and demagnetization.

The More Electro permanent magnetic chuck

What is a Permanent-Electro (Electro-Permanent) magnetic chuck?

The latest of the three technologies, combines the advantages of both permanent magnets and electromagnets.
An electromagnetic force is required for just a couple of seconds to energize/orient the internal permanent magnets. Once magnetized the product remains ON with permanent magnetic force. Equally, an electromagnetic force (in reverse) is required to turn the product OFF. Unlike electromagnets, the product is FAILSAFE and does not get hotter with time. Unlike permanent magnetic products there are no moving parts and forces can be much greater.
They can be used for palletizing, because once energized, the cable can be removed.

What happens when power failures occur?

-Nothing changes with a permanent magnet.
-With a Permanent-Electro Magnet, the workpiece will stay clamped, but the magnet cannot be deactivated until the electrical power is restored.
-An electromagnet will release the workpiece the moment the current is removed from the internal coils.

What makes a good magnetic work holding application?

The primary advantages of clamping magnetically are:

-Better tool accessibility to the workpiece
-Speed of set up
-Uniform clamping means better accuracy
-Safety
-Low maintenance

There are more application specific advantages which the manufacturer will provide at the time of inquiry.

If you are interested in our products, please feel free to contact us!