Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Water Filter

EDI ultra pure water treatment 1TPH, Automatic water softener treatment system, no regeneration chemical needed, no waste water - details see: https://www.machineto.com/edi-water-softener-treatment-system-automatic-ultra-pure-water-treatment-1tph-10230039

EDI ultra pure water treatment 1TPH

Automatic water softener treatment system/EDI ultra pure water treatment 1TPH

Running parameter

The product water quality of EDI is depended on the operation condition. Which including system designing data, feed water quality, feed water pressure. etc.

The EDI unit is adopted CP-3000S EDI module.

Voltage range: 50-180V

Current range: 0.5-6A

Product water flow rate: 1.0-2.0m3/r

Concentrate flow rate: 0.27-0.41m3/h

Electrolyte flow rate: 0.06m3/h

Running current and voltage

Warning: the heat produced when current pass through EDI module must be take away by water. Thus, once EDI product and concentrate stream is blocked or stopped, the power should be cut off. Otherwise, EDI module will be burned thoroughly.

feed water requirement

1)feed water: RO product water

2)TEA< 35ppm.

3) pH : 6.0-9.0

4) Temperature:5-35oC

5)Feed water pressure<0.4Mpa

6) hardness<10.0 ppm.

7) organic glass matter<0.5 ppm.

8) CL2<0.05 ppm , O3<0.02 ppm.

9) conductivity<60US/CM

10)H2S<0.01 ppm.

11)SIO2<0.5 ppm.

12)SDI15<1.0

13)color<5APHA

The best solution to the water scale-ST series automatic water softener

ST series automatic water softener basis on the world-famous American water company pentair and GE Osmonics Corporation softening water treatment technology, use most advanced Fleck and Autotrol automatic control system, integration of the domestic excellent technology and process, we designed an efficient energy-saving latest softening treatment equipment, on user-friendly principles ,is very suitable for wide range water conditions.

Application scope:

ST series softener is widely used in industrial and civil softening system. Such as large-scale heat exchange station, boiler water supply and heating centres, central air conditioning cooling water, bath water, food, beverage and other production process water and softening treatment of high hardness water, pretreatment of reverse osmosis system, and others

Working principle:

ST series softener has more than one pathway of special valves in the same valve body design,

Controllers issued instruction to control calves,make it run automatically, regeneration, and so on,

depending on the pre-set programs. ST series softener is primarily used by control valves, tanks, salt Chamber and the pipeline(by the user) components. They have the flow type and time type by control way; top mounted type, wall mounted type by install way; single tank type, tanks type by the quantity of tank (detail refer to the follow Specification list).

Advantages:.

To realize automatic control.

High-efficiency,low-energy and low operating cost.

Small workshop area

Water quality stable

Work reliably,long service life

Versatility

Note:

1.The user shall order product , accordance with the detail on water report. If the water hardness is too high (hardnessmore than 6mmol/L), it is proposed to increase the tanks, and to increase resin or secondary softening.

2.If have not explanation, I will supply the goods base on our standard designs.

3.We could provide installation service on the our equipment and guide and train to the user the operator.

Products: