Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Mortar Spray Machines

Driving-type Cold Solvent (two-component)Road Line Marking Machine, 1.ISO&CE, 2.digital fully intelligent control system - details see: https://www.machineto.com/driving-type-spray-paint-road-line-marking-machine-10110400

Driving-type Cold Solvent (two-component)Road Line Marking Machine Models: TT-CCP125-IP, TT-CCP125-IIP

Main Advantages:

1. This size driving road marking machinehas better flexibility than driving type machines with bigger sizes and higher efficiency than hand push road marking equipment; what's more, it can be applied to make long-distance uninterrupted lines.

2.Its advanced hydraulic drive stepless variable speed control system can adjust and control speed accurately.

3.Its automatic hydraulic stirring system can ensure eveness of the paint ingredients, improving effectively paint performance and marking line service life.

4.The optimal design of its drive can control the machine operation effectively to ensure safety under emergent circumstances.

5. Its new type high pressure airless pump has stable pressure and big flow, ensuring high efficiency and quality of road line marking job.

6.The marking line width can be adjusted according to the personal needs, and all spray guns can be controlled individually.

7.Its sensitive, accurate and stable computer control system can realize all operations conveniently.

8.Its all-wave warning system can ensure safety during construction.

Main Parameters:

		TT-CCP125-IP	TT-CCP125-IIP
Engine		Kohler 18HP or Honda 20HP gasoline engine	Kohler 18HP or Honda 20HP gasoline engine
Air compressor		0.6m3/min	0.6m3/min
Paint tank capacity		170L	170L×2
Glass beads system		52L	52L
Paint Pump	Equipped quantity	1 set	2 sets
	Maximum pressure	25Mpa	25Mpa
	Maximum flow	20L/min	12.5L/m
Spray gun		Double pneumatic spray gun, one manual spray gun	Double pneumatic spray gun, one manual spray gun
Control system		Digital intelligent control system	Digital intelligent control system
Applied paint		Cold-solvent paint and water-based paint	Cold-solvent paint, cold water-based paint and two-component paint
Marking width		50-500mm(adjustable)	50-500mm(adjustable)
Dimensions (L*W*H), WeightGuide warning screen, pre-marking system, trailer, swing type, screeding type, and two-component		2900×1600×2400mm, 682kg	2900×1600×2400mm, 682kg
Optional system		Guide warning screen, pre-marking system, trailer, swing type, screeding type and two-component marking type

Main Characteristics:

1. Engine:Imported Honda 20HP air-cooled electrical starting gasoline engine.
2. Driving system:Imported oil pressurized continuously variable speed transmission system (HTS) with automatic brake device that can freely go ahead, back off and stop. The left and right back wheels are equipped with a differential speed gearing to ensure it to drive freely around the curve and change directions timely. The hand brake system makes the driving more secure.
3. Driving speed:0-22km/m.
4. Maximum climbing capacity:15°.
5. Micro-electronic control system:This system sets four marking modes (also can make personalized design according to the customer ’s standard). Spray gun controller can freely change the guns between the single and double spray guns.

6. Chassis:A firm welded frame; its surface has been chrome-plated or sprayed with corrosion resistance coating; equipped with imported high speed bearing which ensures the whole machine lighter and more convenient.
7. Rubber wheel:The left, right, front and back wheels are gas-filled pressure resistance vacuum ones whose diameters are 400mm.
8. Guide rod:Can be freely adjusted to up, down, left right.
9. Lighting and warning function:Equipped with highlight lights which makes the night working convenient. The warning lights whose flicker frequency can be freely adjusted greatly improve the safety of the marking work.
10. Paint pump:Equipped with single (type I) 20L/min or double (type II) 12.5L/min plunger type high pressure airless pumps with big flow and stable pressure. Maximum pressure is 20mpa(Working pressure 10-15mpa).
11. Paint tank:The capacity is 215 with a filter device in it.
12. Spray gun:Equipped with three new-type pneumatic spray guns and one hand spray gun with an lengthening pipe for spraying special signs like arrows and letters. The hard side columnar reverse washed nozzle (30/20) makes the on-spot discharging easy and convenient. The non-arc nozzle can enable the marking line straight and exact.
13. Available paint:Applying to spray cold solvent, water-based and two-component road marking paint.
14. Spraying width:100-450mm.
15. Glass beads dispenser:Equipped with single pressurized 60L glass beads bin with a window. Single glass beads spraying gun can be equipped on the left or right that can freely adjust its pressure, flow rate and spray width to ensure the spraying glass beads firmer, evener and more economical.
16. Glass beads bin:The glass beads bin with a window to check the quantity of glass beads timely; the capacity is 100kg.
17.Pre-markingworking synchronous with the marking operation, greatly improving the construction efficiency.
18. Size &Weight:2900mm (L)× 1600mm (W)× 2400mm (H) .682kg