Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Bridge Cranes

Model NO.: Double Girder Overhead Crane, Application: Warehouse Crane, workshop, Feature: Insulating, Running Mod - details see: https://www.machineto.com/double-girder-overhead-crane-10195823

Double Girder Overhead Crane Introduction:

Overhead Crane, commonly called a bridge crane, eot crane, overhead travelling, eot travelling, it is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. An electrichoist, the lifting component of a crane, travels along the bridge.

Overhead Crane structure:

Double Girder Overhead Crane Applications:

Double Girder Overhead Crane, bridge crane, eot crane, overhead travelling, eot travelling are commonly used in the workshop or warehouse forrefinement of steel and other metals such as copper and aluminium. Some are used in mechanical manufacturing workshops for lifting heavy pieces.

Almost all paper mills use bridge cranes for regular maintenance needing removal of heavy press rolls and other equipment. The bridge cranes are used in the initial construction of paper machines because they make it easier to install the heavy cast iron paper drying drums and other massive equipment, some weighing as much as 70 tons.

In many instances the cost of a bridge crane can be largely offset with savings from not renting mobile cranes in the construction of a facility that uses a lot of heavy process equipment.

Overhead Crane Manufacturing Process:

1. Molten steel is made by melting iron ore and coke (a carbon-rich substance that results when coal is heated in the absence of air) in a furnace, then removing most of the carbon by blasting oxygen into the liquid. The molten steel is then poured into large, thick-walled iron molds, where it cools into ingots.

2. In order to form flat products such as plates and sheets, or long products such as bars and rods, ingots are shaped between large rollers under enormous pressure. Hollow tubes, such as those used to form the latticed booms of large cranes, may be made by bending sheets of steel and welding the long sides together. They may also be made by piercing steel rods with a rotating steel cone.

Assembling the Overhead Crane:

A crane is put together from the necessary components. As the crane moves along the assembly line, the steel components are welded or bolted into place. The exact procedures followed during this process vary depending on the type of crane being assembled. For a mobile crane, the components are then assembled to a standardized truck or crawler of the appropriate type.

The assembled crane is tested and shipped. Depending on the size and type of crane, it may be broken down into subsections to be assembled on site. It may also be shipped whole on special large trucks.

Client visit:

Overhead Crane Delivery: