Home  >  Packaging Machinery  >  Packaging Machinery Parts

1. Working width: 1600mm, 2. Design speed: 120m/min., 3. Temperature: 150-200`c, Steam Pressure: 1.12-1.3Mpa. - details see: https://www.machineto.com/double-facer-10062626

Detailed Product Description

The lifting of paper-pressing roll is controlled by pneumatic.

Characteristics

1: Glue roll: Surface polished, with netted rind on it, inside hole processing, Homeostasis tested. Make sure the gluing is equally and min. Consumption.
2:Glue shaving roll: Surface grinding and chromplated.
3: Surface of other paper axises and paper leading roll are chromplated.
4: Up and down of the paper press roll are pneumatic controlled, the operation is easy and fast.
5: The gap between gluing roll and shaving roll is adjusted by hand.
6 : This machine has two models: Independent drive and dependent drive, can choose by customer.
7: Automatic circle glue supplying, can avoid glue subside.
8: Have pre-heating equipment, can accelerate glue gelation.
9: This equipment is easy structure, running on the safe side, has very low problem rate, easy operation, easy maintenance, power cost is low.

Technological Parameters:

1. Working width: 1600mm
2. Operation direction: Left or right (design as customer's workshop. )
3. Design speed: 120m/min. Economic speed: 80-100m/min.
4. Temperature: 150-200`c, Steam Pressure: 1.12-1.3Mpa.
5. Steam consumption: 0.1-0.15MPa, Compress Air: 0.6-0.9Mpa
6. Machine size (L*W*H): 2700mm× 1000mm× 2700mm
7. Paper press model: Press roll model.

Diameter of rolls
1. Glue roll: Ø 215 mm, Glue fixing roll: Ø 110 mm.
2. Down Pre-heater roll: Ø 320 mm Up Pre-heater roll: Ø 270 mm.
3. Paper leading paper roll: Ø 86 mm