Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Vacuum Drying Equipment

1. buffer tank may add to the line, 2.condensator may add to the line, 3.vacuum pump can add to the line, 4.stevioside dry - details see: https://www.machineto.com/double-cones-vacuum-dryers-10297605

This unit can be widely used for drying or mixing powdergranule materials in pharmaceutical, chemical, foodstuff industries etc. It is especially suitable for following materials:

Heat sensitive materials

Materials that is easy tooxidize and have dangerous

Materials that solvent and toxic gases are need to recove

Materials that have special requirement of crystal form.

Materials that have special requirement for the content of residual volatile.

Model	100	350	500	750		1000	1500	2000	3500	4500	5000
Volume inside the tank(L)	100	350	500	750		1000	1500	2000	3500	4500	5000
Loading capacity(L)	≤50	≤175	≤250	≤375		≤500	≤750	≤1000	≤1750	≤2250	≤2500
Revolution(rpm)	3-13						6	5	4	4	4
Power of motor(kw)	0.75	1.1	1.5		2.2	3	4	5.5	7.5	11	15
Occupied area L×W	2160*800	2160*800	2350*800		2560*1000	2860*1300	3060*1300	3260*1400	3760*1800	3960*2000	4400*2500
Rotating height (mm)	1750	2100	2250		2490	2800	2940	2990	3490	4100	4200
Design pressure inside the tank(Mpa)	-0.1-0.15
Design pressure of jacket (Mpa)	≤0.3 Mpa
Working temperature()	(85 in the tank ≤85) tank≤140(in the tank ≤140)
When condenser is used, model and power of vacuum pump	2X-15A 2KW	2X-15A 2KW	2X-30A 3KW		2X-30A 3KW	2X-70A 5.5KW	JZJX300-87KW	JZJX300-49.5KW	JZJX600-811KW	JZJX600-420.5KW	JZJX600-422KW
When condenser is not used, model and power of vacuum pump	SK-0.41.5KW	SK-0.41.5KW	SK-0.82.2KW		SK-2.7B4KW	SK-2.7B4KW	SK-35.5KW	SK-611KW	SK-611KW	SK-915KW	SK-1018.5KW
Weight (kg)	800	1100	1200		1500	2800	3300	3600	6400	7500	8600

NOTES: For raw material, if its volume has great change before and after dryer,then its filling confficient may be increase or decreased suitablely. Speed adjusting motor of 0-6rpm might be chosen according to the users requirements. The follong aspects should be point out when to order:

1,The above mentioned parameters are calculated based on material density of 0.6g/cm³. If its over please point out.

2, If certificate for pressure vessel is required, please point out.

3, If glass lining for interior surface is required, please point out.

If the material is explosive , or flammable, the calculation should be made according to trial results.

NOTE:

1 Its heating has three ways i.e. steam, hot water, heat conduction oil.
2When order, please indicate the temperature of raw material to be undertaken or the operation temperature of drier in order to choose or provide suitable heat source for you.
3When dry viscous raw materiel. our factory will design special stirring device in the chamber
4The auxiliary parts of vacuum drying system can be supplied and installed by Our factory, Please indicate them when order
5lf having special requirements, our factory can also design, manufacture and install as request.
6The cost of complete equipment should be increased in accordance with the needs.