Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Vacuum Drying Equipment

rotary vacuum dryer, 1,Adopt new Spreading plate device, 2,less coal consumption and power consumption, 3,3,widely used - details see: https://www.machineto.com/do-not-miss-out-rotary-vacuum-dryer-low-money-for-price-10297133

Do not miss out rotary vacuum dryer,low money for price!

Description:

Equipped with Spreading plate, cylinder support the two roller by tyre, the gear wheel used to prevent the cylinder axial movement, the reducer drive big gear and small gear motor, and the big gear is fixed on the cylinder, the windshield prevent the cold air into the body and the combustion chamber. Wet material with hot gas to feed the enter, in cylinder body lift up the lift plate material, make it through the heat flow and drying. Our dryer can be made according to different drying materials for the external heating and within heating. The external heating drying of charcoal, lees, coconut trees leather materials. In heating can be drying slime, sand, slag, chicken manure, cow dung and so on. Heat can use coal, gas occurrence furnace, hot air stove, gas, electric furnace.

Technical Advantage:

Our dryer adopts new Spreading plate device, which has guidance, flow, material functions, it can make the material content in the dryer radial cross section to full uniform, material will become thin and all, the state of the heat flow entirely, to achieve the purpose of make full use of the heat. Our dryer choose reasonable operating parameters, coal consumption and power consumption of general baked dry machine more than 10-15%, one machine yields above 10-15%, it has been widely used. in the cement and mineral processing enterprise.

Operating principle:

Dryer heat from the combustion device, the dryer adopts whatever in heating mode. Therefore need to dry the material from feeding, the feeding slipped into the cylinder, it is spiral copy board.On the one hand the dryer tilt put material on the gravity and return flows back end, on the other hand the material being copy board over and over again, brought to the top and lift it down constantly, make the material inside the tube forming uniform curtain, and the heat flow into the line of heat exchange in the cylinder fully, because of the material and Spreading plate, contains the moisture of being drying, thus attaining the purpose of drying.

Specification:

		Main motor		Main engine rate
		Power (KW)	Model	Model	speed ratio
Ö1.2×10m	2.5	7.5	Y160M-R3	Zl50-16-I	--	13.5
Ö1.5×12m	3.3-4.9	10	Y160L-6-B3	JZQ500-III-2F	--	18.9
Ö1.5×15m	4-6	18.5	Y200L1-6	JZQ500-III-2F	--	21
Ö1.8×12m	4-6	18.5	Y160L-6	ZQ50-16II-2	16.46	23
Ö2.2×12m	7.12	18.5	Y200L7-6	JZQ650-III	31.5	38
Ö2.2×14m	7.12	22	Y200L7-6	JZQ650-III	31.5	40
Ö2.2×16m	12	30	Y225M-6	JZQ750-III	31.5	45
Ö2.4×14m	12	30	Y250M-6	JZQ750-III	31.5	51
Ö2.4×18m	10-13	37	Y250M-6	ZL85-13-I	27.16	54
Ö2.4×20m	10-14	37	Y250M-6	ZL85-13-I	27.16	55
Ö3×20m	25	55	Y250M-4	ZL100-16-I	41.52	78
Ö3×25m	32-36	75	YR280M-4	ZL100-16-I	41.52	105

Indirect drying parameters:

Model Tube diameter ×Tube length	Inside diameter of outer shell (mm)	Inside diameter of inner shell (mm)	Shell length (m)	Shell cubage (m3)	Shell obllqulty	Lifting blade form	Highest inlet air temperature (°C)	Overall dimension
Ö1.5×15m Ö1.5×17m Ö1.5×19m	1500	500	15 17 19	20.27 22.97 25.68	3-5%	Up - lift	850	16.2×2.7×2.7 18.2×2.7×2.7 20.0×2.9×2.9
Ö1.8×21m Ö1.8×23m Ö1.8×25m	1800	650	21 23 25	35.91 39.33 42.75	3-5%	Up - lift	850	22.5×2.7×2.7 24.5×2.9×2.9 26.5×2.9×2.9
Ö2.2×21m Ö2.2×23m Ö2.2×25m	2200	800	21 23 25	58.10 63.61 69.15	3-5%	Up - lift	850	--