Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Nonwoven Machines

Disposable Non Woven Face Mask Machine:, Productivity:130-160pcs/min, Frequency :20KHZ, Output Power:4KW - details see: https://www.machineto.com/disposable-non-woven-face-mask-machine-10275206

Disposable Non Woven Face Mask Machine

(NK-GW2015)

Disposable Non Woven Face Mask Machine is the auto equipment which be used to the product of disposable face masks, be suitable for the material of non-woven fabric , activated carbon and filter material from 1~4 layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products automatically. According to different material you use, the finished products can reach the standards as N95,FFP2 etc.

Disposable Non Woven Face Mask Machine Technical Data:

Dimension:3900(L)*905(W)*1600(H)mm
Supply Power:220V 50/60Hz
Productivity:130-160pcs/min
Frequency :20KHZ
Output Power:4KW

Finished Product:

Inner Ear-loop Face Mask Machine

Ultrasonic Inner Ear-loop Mask Machine uses ultrasonic technology to weld the elastic band to the two sides of Face Mask Blank, then finishes the whole procedure of making a complete inner ear-loop face mask. Our face mask machine only needs one operator to put the face mask blank onto the conveyor belt, then it will finish all the remaining processing automatically.

Technical Data:

Dimension: 1915(L) X 855(W) x 1780(H)mm
Voltage: 220V, 1 or 3 phase
Productivity: 40-50pcs/min
Power consumption: 6KW
Air Pressure: 6kg/cm2
Frequency: 20KHZ

Finished Product:

Outer Ear-loop Face Mask Machine

Outer Ear-loop Welding Machine will weld the elastic band to the sides of mask blank with ultrasonic technology, then finished the whole processing of outside mask blank, need only one operator to put the mask blank onto the jigs, the remaining will be finished by the machine automatically, the productivity of this machine will be higher than other outside ear-loop welding machines.

Technical Data:
1. Model No.: NK-UMM03
2. Size: 2646(L)*620(W)*1750(H) mm
3. Voltage: 1 P 220V 50/60Hz
4. Productivity:45~55 pcs/min
5. Air pressure: 6 kg/cm2
6. Power consumption: 3 KW

Finished Product:

Tie-on Face Mask Machine

Tie-on type mask making machine adopt ultrasonic welding method, equipped conveyer device, put the semi-product onto conveyer device, through pull tube Covered edge, use ultrasonic design roller welding, and cut off the band, and output the finished-product. Only need one worker to put the semi-product onto the conveyer device, all the other actions finished by tie-on type mask making machine.

Technical Data:

Model no.: NK-BDJ10
Supply voltage:220v
Frequency:20K 2set of ultrasonic system
Power:3kw
Capacity:25-30pcs/min
Size of Machine:1900(L) X 730(W) X 1300(H) mm
Weight of machine:300KG

Finished Product:

Face Mask Ear-loop Welding Machine

After finished the mask blank, you can use ear-loop welding machine to weld the ear-loop by hand, easy for operation, and the welding effect is beautiful. It can weld the ear-loops for disposable masks, inner/outside ear-loop masks, cup masks, duckbill masks and other special-shaped masks.

Technical Parameter:

Model No.: NK-CMM06

Air Pressure: 3 KG/CM2

Output Power: 500W

Frequency: 35 K

Voltage: 220 V

Dimension: 800 x 600 x 1400 MM

Productivity: 10 ~ 12 pcs/min

Finished Product:

Workshop: