Home  >  Industrial Supplies  >  Machine Oil Purifier

1.Engine Oil Vacuum distillation, 2.high limited vacuum, 3.distill black engine oil to yellow base oil, 4.high recovery rate - details see: https://www.machineto.com/dir-waste-engine-oil-vacuum-distillation-oil-re-useing-equipment-10228985

DIR Black Engine oil Vacuum Distillation equipment

Model	DIR Waste Oil Vacuum Distillation Re-refinery Machine
Capacity	1,000Liters per day to 15,000Lites per day
Priciple	pyysical-chemical reaction
Recovery rate	more than 85%
Working Temperation	300-320Degree
Chemical	Catalyst with percentage 2%-5%

Used oil should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants so it can be recycled again and again. There are many uses for recycled used oil. Recycling of waste oil has potential to save the energy, protect environment and recycle the natural resources.

Due to waste oil contain too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. and due to the traditional technology only can refine the waste oil to base oil, can’t use directly, so our company is researching the new technology about distilling machine, which can distill all kinds of waste oil into clean oil, easy to operation, and the lower operation cost.

The purpose of waste distillation machine is re-refining industrial waste oil(including equipment lubricants, metal-working oil and process oil) and used automotive lubricants( such as engine oil, hydraulic oil and gear oil) to clean oil, then reuse it.

Distillation is the physical separation of components of lubricating oil by boiling range. Depending on the type of distillation, the boiling ranges can produce gases and gasolines at the lower boiling points with heavy lubricating oils being distilled at higher boiling points. Distillation is the core process for a facility capable of producing re-refined base-oils to virgin base-oil quality.

I.Working principle

This equipment adopt physicochemical actions to polymerize,passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.

II. Advantage:

It’s easy to produce waste residue and bad smelling by traditional vitriol distilling, which will bring potential secondary pollution, moreover, it’s easy to change the color to black and produce the odor due to the recycled oil react with the oxygen. But after we use the alkaline complex catalyst refines the oil, the recycled oil havn’t change the color and havn’t create the odor. What’s more important, you can use the resid to be as the fuel to heating the oil, without any pollution. And the machine is easy to operate, only 1-2 workers can control the machine.

IV. Features:

1. Easy to operate, low operation cost

2. Environmentally friendly, without secondary pollution.

3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.

4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.

5. Low cost contain:

1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.

2) Heat consumption: 10⁵kcal per ton waste oil

3) Power consumption: 40Kwh to recycle 1 ton waste oil

6. High degree of automation.

V. Recovery Rate:

Component	Percentage(%)
water	1.5%
Gasoline/diesel oil	7%
Light Lubrication oil	42%
Heavy Lubrication oil	43%
Residue	6.5%
Total	100%

VI. Treated Oil analysis (take the waste diesel engine oil for example)

Item	Heavy Lube oil	Light Lube Oil
Appearance	lucidity	lucidity
Color ≤	1.5	1
Viscosity (40°C)mm2/s	49.57	26.86
Viscosity Index ≥	96	95
Anti-oxidation 150°C,min ≥	180	180
Deemulsification,54°C	5min	5min
Flash Point(Open)°C ≥	228	224
Pour Point °C ≤	-12	-16
neutralization value (mgKOH/g) ≤	0.02	0.02

VII. DIR Technical parameter

model	Capacity T/D(24h)	Vacuum set			Oil pump			Total power KW
		Gas inlet mm	Gas outlet mm	Vacuum set power KW	Oil inlet mm	Oil outlet mm	Pump power
DIR-1	1T/D	150	50	16	Φ25	Φ25	8	24
DIR-2	2T/D	150	50	19.5	Φ33	Φ33	8.5	28
DIR-3	3T/D	200	50	22	Φ42	Φ33	12	34
DIR-5	4T/D	200	50	25.5	Φ42	Φ33	14.5	40
DIR-5	5T/D	250	50	29	Φ48	Φ42	19	48
DIR-6	6T/D	250	50	33.5	Φ48	Φ42	20.5	54
DIR-7	8T/D	250	80	44.5	Φ64	Φ48	27.5	72
DIR-8	10T/D	250	80	55.5	Φ64	Φ48	28.5	84

Clients come to visit us, and take the recycled oil back to theit country for making analysis report.

Malaysia Clients come to visit us twice, finally they are satisfied with the macine and made order, above is their oi analysis report.following is their machine, engineer is installing this machine from 2013 spetember 10-30.

Our Machines:

Our products are largely used in the fields of electric power, petroleum, natural gas, mine, machinery manufacturing, steel,

metallurgy, chemical industry, railway station, aviation and shipping etc. large enterprise. Our products involve in ZJA Series

Double Stage Vacuum Insulation Oil and Transformer Oil Purifier, ZJB\ZJBT Series Vacuum Transformer Oil Purifier,

ZJC Series Turbine Oil Refinery, ZJD Series Lubrication and Hydraulic Oil Purifier, ZJL Series Multi-function Oil Recycling system, YL Series Portable Oil Purifier, NRY Engine Oil Recycling Machine and ZJD-F Fuel Oil Purifier,DIR Vacuum Distillation etc. our machines cover more than 500 different model products in 30

series and can meet different needs of customers. We can offer different settle blueprint according to customers' special

requirement to confirm safety production and decrease cost.

CERTIFICATION:

Our Clients

we have cooperated with many customers around the world and have good quality control such as ISO9001,2000 and SGScertificates.

Our machine mainly sold to Middle East(Dubai, Pakistan, Yeman, Saudi Arabia), Southwest of Asia(Singapore, Malaysia, Indonesia, Viet nam, Cambodia, Philippines, Hongkong), Africa(Egypt, Kenya, Mali, Lybia),Europe (Italy, England, Albania, Spain, Greece) and South America (Hondurase,Mexico,Colombia,

Chile,Peru) etc.

After-sales Services
One year guarantee for product quality. (People damaged parts are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training for machines installation and operation of the staffs.

Welcome to visit us,Your inquiries are highly welcomed at any time, we are ready to make a response very soon