Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Dry Cabinet

Low Frequency Desk-top Ultrasonic Cleaner - details see: https://www.machineto.com/desk-low-frequency-ultrasonic-cleaner-10288117

Safety instruction
Notice hereby is extremely important, be sure to abide strictly !

Dangerous! (May cause death or hurt)
1, The plug of this instrument must be secure, good ground connection, otherwise result in electrical shock or fire hazard.
2, Do not use non specified power cord, connect longer cord, or pull out attaching plug in the working process, otherwise result in electrical shock or fire hazard.
3, Be sure not to pull out the power cord with wet hand otherwise may result in electrical shock.
4, Any error states (such as scorched smell, etc.) please immediately pull out the attaching plug or switch off the power.
5, Prohibit repairing without authorization, otherwise will result in electrical shock or fire hazard

Important! (May cause hurt or property loss)
1, Must read this manual carefully before use
2, Use independent power socket
3, Do not pull the power cord.
4, Confirm supply voltage within the permitted range before use.
5, Must pull out the power plug under following conditions,
1) When replace fuse wire
2) When something wrong with the instrument
3) If long time no use
4) Move the device

Attention! (may affect uselife and normal use)
1, Should place it on a hard and stable place,keep horizontal.
2, Keep it away from heat source or sunshine.
3, Do not close to volatile flammable chemicals such as gasoline and banana oil,etc.
4, Keep it clean outside and inside,often clean debris and stains.
Application
Ultrasonic source and purge tank are in one. It is mainly apply to small batch to clean, degassing, defoaming, emulsify, blending, permute, extract, powder grinding and cell crushing in business, light industry, universities and colleges, scientific research units.
5 Usage
1 Put appropriate pure water into the sink. The height of liquid level is based on submerging being washed spare parts. Usually it should not exceed three-quarter of the sink.
Start electric control heating switch. Adjust water temperature to sixty degree. During the process of using the ultrasonic cleaner, the highest temperature of detergent should not exceed seventy degree.
3. When the water temperature rise to forty degree, put in appropriate detergent into the sink and gently stirring pure water to make it dissolved fully.
4. First clean the superficial dirty on the machine parts simply before washing it so that cleanout fluid's using life span will be extended.
5. Put machine parts into reinforcement material basket. Then put them into washing pool lightly. Please try your best to put machine parts equably, when put too many parts into the basket for one time.
6. Set the frequency, power and time well. Then turn on the machine to wash.
6 Maintenance
1. Distance over 10cm from wall
2. Away from heat explode material
3. Open air area with relative humidity below 85%
4. Donot put heavy or liquid on top of device

7 Warranty
One year under proper using condition.

Low Frequency Desk-top Ultrasonic Cleaner
JK-LUC-60DE
Volume of purge tank:1.3L;
Frequency of ultrasonic wave:40KHz;Ultrasonic power:50W;
Time control:1-30min;Net weight:1.6Kg;