Home  >  Raw Material Processing Machinery  >  Paper Processing Machinery

Goods: paper impregnting lines, Type:TOCC1300-2800, Working Speed: One step:5-70m/min; two step:5-40m/min, paper width:90-260cm - details see: https://www.machineto.com/decore-paper-impregnating-lines-10333279

Decor Paper Impregnating Lines( One/ Two Step)

Paper impregnating lines is main used to impregnated, gluing dry and stack with melamine resin, urea resin, phenolic resin. It is for flooring paper, decoration paper, craft paper and furniture paper etc. The resin gives the impregnated material strong mechanical properties, making it ideal as decoration laminates, industrial laminates and laminated for melamine faced wood boards.

1. General parameter

Type No.	TOCC1500B	TOCC1800B	TOCC2100B	TOCC2400B	TOCC2800B
Paper width	900~1300	900~1600	900~1900	900~2200	900~2600
Working width	1500mm	1800mm	2100mm	2400mm	2800mm
Mechanical speed	4~40m/min
Working speed	5~35m/min
Working height	1250mm
Heating medium	Thermal oil/hot air
Max. temperature of thermal oil	250°C
working temperature of drier room	120~180°C

2. Main measurement

Working width	1500mm	1800mm	2100mm	2400mm	2800mm
Roll width	1500mm	1800mm	2100mm	2400mm	2800mm
max. width of paper	1300mm	1600mm	1900mm	2200mm	2600mm
max.diameter of paper core	φ1100mm
max.weight of paper roll	1200kg
inner diameter of paper roll core shaft	3’’(76mm)
length of every drier unit	3750mm
valid drying length	(2+4)×3750=22500mm (3+5)×3750=30000mm
valid drying width	1400mm	1700mm	2000mm	2300mm	2600mm
total length of production lines	~48000mm ~56000mm
max. width of production lines	~3000mm	~3300mm	~3600mm	~3900mm	~4200mm
max. height of production lines	4500mm
operation location	left or right side of lines, along the direction of paper running
driving location	right or left side of lines, along the direction of paper running

3 .drive/power parameter

driving power	3-phase,380V,50Hz(or as requested)
control power	2 phase,220V,50Hz(or as requested)
total power	~85kw	~85kw	~85kw	~85kw	~85kw
Heating medium	thermal oil (inlet temperature is over 220°C) /hot air
Total heat consumption	~450000 Kcal.	~450000kcal.	~450000kcal.	~450000kcal.	~45000 0kcal.
compressed air pressure	0.5~0.7Mpa
compressed air consumption	~8m3
cooling water consumption	12m3
supplying pressure of cooling water	0.2~0.4Mpa

4.Main Parts:

No.	Name	Quantity
1	unwind	1unit
2	primary impregnation machinery	1unit
3	primary drier	2-4sections
4	secondary coating machinery	1pc
5	secondary drier	3-7sections
6	cooling area	2unit
7	bias-adjustable machinery	1unit
8	tractor	1unit
9	Cutting & stacking device	1unit
10	electronic control system	1 set

Detail construction of lines is made as requested by the clients