Home  >  Industrial Supplies  >  Motors  >  DC Motor

1) Gold motor supplier of Alibaba domestic website since 2003, 2) OEM/ODM since1997, 3) customize performance, 4) free sample - details see: https://www.machineto.com/dc-motor-for-hair-dryer-printer-motor-10237463

The motor can be adjusted according to your requirements.

DC motor designed for hair dryer, printers and copiers

Below is some of our existing models, we do design specific one for each customer.

Part Number	Diameter (mm)	Body length (mm)	Thickness (mm)	Shaft Diameter (mm)	Customize functions	Application
LRC380/385	27.7mm	37.6mm	---	2.3mm	V,A,torque,speed	printer, hair dryer

customer.

Usage hints:

1.1) Motor Mounting.

1.1.1)Most motors provide tapped holes on motor housing for easy installation. Please do not use long screw, otherwise, it probably collide the parts inside.

1.1.2) Bearing bosses are also used for mounting motors. Please avoid excessive clamping forces on these areas. It is preferable not to use ventilation holes for locating means, otherwise, it will affect motor’s cooling function in operation. Any ventilation holes in the motor should not become blocked in your product without consultation ever. If adhesives are to be used to mount your motor care must be taken to avoid any adhesive getting into the bearing areas. Special care must be taken if outgassing adhesives are used since commutator contamination can result and cause a poor performance on the motor.

1.2Connecting your motor:

Whatever means you use to connect your supply to your motor please take care not to use so much force or heat that you may cause distortion to components inside the motor. Please take care the granule of tin and debris drop into the motor housing from ventilation holes.

1.3Coupling your motor:

If you intend to couple a gear or a fan or some other items to your motor shaft during assembly. Always remember that unusual radial and axial loads transmitted to the motor from the coupling during operation of the motor can have serious effects on the life of the bearings. When press fitting a gear, ulley or anything alike onto motor output shaft. Do put them at right position on a horizontal bench and press insert the shaft by pushing its other end vertically. Don’t push the motor end plate.

1.4Overloads:

Small high power motors are subject very fast temperature rises. Take care not to apply excessive voltage to the motor or to operate it at stall or near stall for prolonged periods without first consulting with ours Engineers.

1.5Hazardous environments:

The degree of protection against corrosion on motor is satisfactory only for normal environments. There are small sections of the housing in which some bare metal is exposed and is susceptible to corrosion. It is advisable not to store or use the motors in corrosive environment without consultation with us.

ALWAYS REMEMBERthat longhui have a substantial team of Engineers dedicated to the solution of problems of the application of our motors in new products. We are proud of our good working relationship with our customers and we will be most pleased if we can assist you to find a solution to any problem which you may encounter. If you have any concerns about this please consult with longhui.

Below are some images of our factory.