CW5045 2-phase Stepper motor driver, Stepping motor driver,1.5A~4.5A, 24Vdc~48Vdc
Place of Origin:Jiangsu China (Mainland) | Brand Name:smartautomation | Model Number:CW5045 | Motor Type:Stepper Motor |
Output current: 1.3A-4.5A
Mircostepping: 1(1.8º) 1/2 1/4 1/8 1/16 1/32 1/64 1/128 1/256 1/5 1/10 1/25 1/50 1/125 1/250
Protection form: overheat protection, lock automatic half current, error connect protection
Dimensions: 118mm × 76mm × 33mm
Weight: <300g
Working environment: temperature: 15-40, humidity <90%
I/O ports:
VCC+: DC power positive pole (Note: it must guard against exceeding 50V, so as not to damage the module
GND: DC power cathode
A+ A-: Stepping motor one winding
B+ B-: Stepping motor other winding
PUL+ PUL -: Stepping pulse input+5V (Rising edge effective,rising edge duration >10uS)
DIR + DIR-: Stepping motor direction input, voltage level touched off,high towards, low reverse
ENA+ ENA-: motor free
Note:
When ambient temperature is high or working current over 2.7A, fix the module on big metal shell, or use axle flows fan dispels the heat, to make the module run reliably for a long time.
Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
The fault phase is protected: When the double-phase electrical machinery is connected with driver, users are apt to connect the phase by mistake, thus would damage the driver seriously.
The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake, and output is small.
Please check whether the wiring of electrical machinery is a mistake
Packaging Detail:Standard Export Package |
Delivery Detail:1 week |