Outline: CT-G series heated air circulation drying oven, is conforms to “GMP” completely the drugs production standard static special-purpose drying equipment, it overcame other drying oven clean dead angle to be many, cleans not conveniently, easy to form reports on accomplishments the pollution and the air cannot purify and so on shortcomings, was my factory absorbs the domestic and foreign vanguard technologies, but aimed at “GMP” specially the standard but developed the development independently the series heated air circulation drying oven, this series equipment used the touchscreen automatic control system. CT-GA series heated air circulation drying oven carries on the heated air circulation by the low noise axial-flow fan to be dry, the new atmosphere supplemented that the mouth has, the highly effective filtration refining equipment according to the customer request, after steam or electric heating heater heating, sends each material plate by the minute air deflector adjustment, enables the hot blast to pass each level evenly by the dry material. Row of wet special-purpose air blower compulsion row of wet, will circulate the amount of wind 20-30% compulsions to discharge, a row of wet mouth and is loaded with purifies against terflow unit. The CT-GA series drying oven heating heat source uses the steam or the electric heating may, has the operation to be easy, the clean replacement convenience is thorough, the failure rate low merit, is present “GMP” the authentication enterprise chooses the quantity many static state heated air circulation series drying oven. CT-GB series heated air circulation drying oven and the CT-GA series different place to circulate the air blower to use 4-72 series centrifugal fans, it not only has outside the CT-GA series merit, but also has the wind pressure high, the drying velocity quick characteristic, to be especially appropriate to the easy raped drying goods. Drying oven schematic drawing:
Technical parameter Specification/ model | Each time dry quantity (kg) | Necessary power (kw) | Consumes the steam (kg/h) | Amount of wind (m3/h) | High and low temperature difference(°C) | Uses for parts to dry the plate | External dimensions breadth * depth * high (mm) | Dries the vehicle | CT-GA-I | 100 | 0.45 | 20 | 3450 | ±2 | 48 | 2550×1200×2200 | 2 | CT-GA-II | 200 | 0.9 | 40 | 6900 | ±2 | 96 | 2550×2200×2200 | 4 | CT-GA-III | 300 | 1.35 | 60 | 10350 | ±2 | 144 | 2550×3200×2200 | 6 | CT-GA-IIII | 400 | 1.8 | 80 | 13800 | ±2 | 192 | 5010×2200×2200 | 8 | CT-GB-I | 100 | 1.1 | 20 | 1400 | ±2 | 48 | 2550×1200×2466 | 2 | CT-GB-II | 200 | 1.1 | 40 | 5200 | ±2 | 96 | 2550×2200×2529 | 4 | CT-GB-III | 300 | 2.2 | 60 | 9800 | ±2 | 144 | 2550×3200×2624 | 6 | CT-GB-IIII | 400 | 2.2 | 80 | 9800 | ±2 | 192 | 5010×2200×2624 | 8 |
|