CS PU foam painting machine for arch span building

More advanced Polyurethane Spray configuration, higher heating power, lighter weight and better mobility - details see: https://www.machineto.com/cs-pu-foam-painting-machine-for-arch-span-building-10110302
Place of Origin:Liaoning China (Mainland)Brand Name:ChangshengModel Number:CSMain frame:1 set
Spray gun:1 set   
CS PU foam painting machine for arch span building
contact supplier for CS PU foam painting machine for arch span building


CS PU foam series be widely used in different kinds of areas such as refrigerator warehouse heat preservation, building external wall, roof water-proof and heat preservation, gymnasium, motorcar and ship, air conditioner adiabatic, and solar water heater and so on.

CS PU foam machine GEN I

Standard Configuration

Mainframe: 1 set

Spray gun: 1 set

Heating and preserved pipe: 15m

Connecting pipe for spray gun: 1.5m

Transfer pump: 2 sets

Technical Parameter:

Academic max. output of material pump:9.5kg/min(21b./min)

At operating pressure material output: 4~8kg/min

The highest heating temperature: 80°C

Heating device power for material: 3000w x2(or 4500w x2optional)

Heating power for pipe heating preservation: 3500w

Single material output output pressure:11Mpa(1600psi)

Max. Pipe length: 90m(300Ft)

The highest heating temperature: 80°C

Air source requirements: 0.9m3/min 0.7Mpa(33cfm,100psi)

Electrical requirements: 3-phase, 4-line 380v, 50/60Hz, 9Ax3+15A

CS PU foam machine GENS II

Standard Configuration

Mainframe: 1 set

Spray gun: 1 set

Heating and preserved pipe: 15m

Connecting pipe for spray gun: 1.5m

Max.Pipe length:45m

Transfer pump: 2 sets

Technical Parameter:

Electrical source: 220v 7000w

Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min

Output: 4~8kgsmin

Heating device power for material: 2500w ×2

Heating power for pipe heating: 2000w

Single component output pressure: 5~10Mpa (700~1500psi)

CS PU foam machine GEN III

Standard Configuration

Mainframe: 1 set

Spray gun: 1 set

Heating and preserved pipe: 15m

Connecting pipe for spray gun: 1.5m

Transfer pump: 2 sets

Technical Parameter:

Electrical source: 220v 7000w

Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min

Output: 2~6.8kg/min

Heating device power for material: 2500w ×2

Heating power for pipe heating: 2000w

Single component output pressure: 5~10Mpa (700~1500psi)

The range of the ratio: 1:1~2:1

CS PU foam painting machine for arch span building
Packaging Detail:Pakaged
Delivery Detail:In stock

Related Product for CS PU foam painting machine for arch span building