Home  >  Industrial Supplies  >  Air-Compressor Parts

Crownwell Refrigerated Air Dryer 1.2m3/min-100m3/min Air Dryer - details see: https://www.machineto.com/crownwell-refrigerated-air-dryer-1-2m3-min-100m3-min-air-dryer-10209109

Crownwell Refrigerated Air Dryer 1.2m3/min-100m3/min Air Dryer

Standard Working Conditions

Air inlet temperature ≤80°C

Ambient Temperature ≤40°C

Working Pressure 10 bar

Dew point 3-10°C

Refrigerant R22

Flow chart

1,Heat exchanger 2,Evaporator

3,Gas/Liquid separator 4,Jam-prevent drain filter

5,Manual draining valve 6,Refrigerated compressor

7,Aspirating filter 8,Vaporization

9,Separator 10,Gas/Liquid mixer

11,Thermal expansion valve 12,View monitor

13,Dry filter 14,Tank

15,Hot gas by-pass valve 16,Water adjustable valve

17,Water filter 18,Condenser(Air-cooling)

19,Condenser(Water-cooling) 20,Pre-cooler(Water-cooling)

21,Pre-cooler(Air-cooling) 22,Auto-drainer

Features

Constant dew point temperature

Stable performance for long time running

External type drain for easy maintenance

Low pressure drop for energy saving purpose

Option

Environmentally friendly refrigerant, such as R407C and R134A, R404A

Special power supply

NPT connection

Dew point indicator

High pressure indication for small air dryer

Pre filter and after filter installed

Higher ambient temperature

PLC controller

Design characteristics

• Refrigerated & air system is accurate calculated by professional designing engineer, keep 20% capacity.
• Pipeline is made from inner zincification. You can choose working pressure during 0.3~4.5Mpa.
• Stainless steel pipeline, it's suitable for medicine, food stuff, acid-resistant, alkaline-resistant and erodent-resistant industry.
• Ripple pipeline of both internal and external of the heat exchanger to increase the using rate of cooling air, adverse current structure, perfect returning temperature and it won't freeze.
• Evaporator is made from laminose copper pipeline with aluminum flake, high efficiency of heat exchanging of the perfect structure.
• Good drainage, it adopts 3 grades for draining, can drain lots of condensate water and oil contaminant so as to keep clean and dryness of the system and air, meanwhile reduce system load.
• Multi-control of circuitry to supply to different users (single control; integrate circuit, linkage control, PC panel, frequency conversion, etc.)
• Outer cooling fan with large volume, low noise, and long life if switch frequently.
• Low condenser made from copper, slow flow, multi-cycling and high heat exchanging rate. It won't freezing and dirty if stop for a long time.
• Armstrong foam burning resistant & adiabatic material. It's the least loss of cooling air.
• Protection level of compressor is IP54 (dustproof and spill proof).

Specification

Model	Flow Capacity	Power Supply	Conn.	Dimensions LxWxH	Weight
	M3/min			mm	Kg
CW-1F	1.2	220	ZG1”	680x490x670	60
CW-2F	2.4	220	ZG1”	700x450x920	80
CW-3F	3.8	220	ZG1 1/2”	850x500x970	105
CW-5F	5.2	220	ZG1 1/2”	850x500x970	135
CW-6F	6.5	220	ZG1 1/2”	900x560x1070	190
CW-8F	8	220	ZG1 1/2”	900x560x1070	210
CW-10F	10.7	380	ZG2”	1180x670x1140	225
CW-13F	13.8	380	ZG2”	1180x670x1140	260
CW-15F/W	17	380	DN65	1220x7000x11200	350
CW-20F/W	22	380	DN80	1360x710x1120	400
CW-25F/W	27	380	DN80	1550x850x1400	500
CW-30F/W	35	380	DN80	1650x930x1500	600
CW-40F/W	45	380	DN100	1860x1050x1610	750
CW-50F/W	55	380	DN125	1950x1050x1690	820
CW-80F/W	87	380	DN150	2540x1750x2400	2000
CW-100F/W	110	380	DN150	2500x1850x2600	2200