Creel Series for warping machine

Facebook Twitter LinkedIn Google Google+

General overview:

V-shaped recirculated bobbin creel is assorted with direct warping machine for chopped fiber. Its advantages include shorter creel body, no carrier between frame and creel, especially adapted for some chopped fibers which are sensitive to friction, working under low tension and high speed, be favorable to reduce tension difference of yarn and end breakage when warping. The interleaving creel optimizes the space utilization. The inner side of V-shaped creel could store bobbin, which is convenient for operation, The bobbin changing time is short so that can save idle period for warping machines. This king of bobbin creel is especially fit for high speed warping.

Technical characteristic:

1. Way of bobbin changing: put the bobbin in the inside of the creel in advance, change the bobbins collectively through driving and turning of endless chain.

2. Both sides of the creel is in V shape, adopting turning outside yarn guide type to guide yarn, no yarn carrying plate, so the yarn founctioning freely and no yarn friction.

3. Breakage and monitoring:single spindle photo electricity inspection, even the fine count yarn is also inspected accurately.

4. Every spindle id equipped with break and display and switch, so it is convenient to deal with break end, and can gain high production efficiency.

5. The tension difference in the back creel and front creel can be reduced by adjusting the angle through the tension roller. The minimum yarn difference can be gained through this way. Another function of the tension roller is to unfasten the ties when start the machine again, which stopped when unreeling at high speed. It is good to high speed unreeling.

6. In order to avoid the yarn looseness when reducing the speed the speed, every spindle has yarn clamp device, which can add soft brake to the yarn when starting and stopping.

7. Yarn cutting: manual, or power driven

8. Dust control: electric reciprocating-walk type

9. Independent control casing id installed in front of creel.

Technical features:

1. Spindles blade of donning: diameter 10×200

2. Column distance, layer distance, number of layers, number of column, number of spindles please see attached table.

Certificate of our Company:

ISO9001-2000

ISO14001:2004

OHSAS 18001:1999